Olson Phy 121 Homework 3-4

John Henry Moore Distinguished Professor of Metallurgical Engineering

Education: BS Washington State University; Ph.D. Cornell University / PE State of Colorado, Professional Engineer

Research Interests: Welding and joining science; metallurgy of reactive metals; environmental degradation of materials; advanced NDE alloy microstructural stability assessment.

Phone: 303-273-3955

FAX: 303-384-2189

E-mail: dolson@mines.edu

 

 

 

 

 

 

 

 

 



I perform research in four areas: welding metallurgy, reactive metal metallurgy, corrosion, and advanced nondestructive evaluation. This research includes the pyrochemical behavior of welding consumables, influence of microcompositional gradients on weld properties, weld microstructure-property relationships, and the predictability of weld properties from knowledge of compositional and process parameters.

The processing and behavior of reactive metals and their containment are being studied; they are important in many technologies. Calcium, lithium, titanium, cerium, actinides and other reactive materials are among the subjects of investigation.

I also explore alloy phases and microstructural stability by the use of electromagnetics and other physical nondestructive techniques. Major improvements can be made in our ability to evaluate service life and the influence of materials processing using these nondestructive analytical techniques.

Aqueous microbiological influenced corrosion and high-temperature corrosion research are in process. Advanced corrosion sensors are of research interest. Pipeline steel and boiler steel metallurgy and corrosion are being investigated

Honors
AIME Student Chapter President (W.S.U.)
Alpha Sigma Mu (Metallurgical Honorary)
Tau Beta Pi (Engineering Honorary)
Sigma Xi (Research Honorary of North America)
Theta Tau (Engineering Honorary)
Blue Key (Engineering Honorary)
Ohio State University Post Doctoral Fellowship (1971 72)
Bradley Stoughton Award for Young Teachers of Metallurgy, ASM (1976)
Outstanding Young Member Award, Rocky Mountain Chapter, ASM (1977)
Comfort A. Adams Four Year Membership Award for Teaching, AWS (1978)
MSTD Literary Award, ANS (1978)
Faculty Intern Program, ASTM (1981)
Department of State Scholar Diplomat Program (May, 1981)
AMOCO Foundation Teaching Award, CSM (1982)
International Metallographic Society Award, Third Place Nonferrous Class (1982)
Listed in AAES Who's Who in Engineering
Listed in the American Men and Women of Science
ADAMS Lecture and Award, Dallas, TX, AWS, (April, 1984)
McKay Helm Award, Las Vegas, Nevada, AWS, (April, 1985)
ASM Fellow, Toronto, Ontario, ASM (October, 1985)
McKay Helm Award, Atlanta, Georgia, AWS (April 1986)
Warren F. Savage Award, Chicago, IL, AWS (March 1987)
McKay Helm Award, Washington, D.C., AWS (April 1989)
McKay Helm Award, Anaheim, CA, AWS (April 1990)
Burlington Northern Foundation Faculty Achievement Award, CSM (April 1990)
Charles H. Jennings Memorial Award, Detroit, MI, AWS (April 1991)
William Irrgang Award, Chicago, IL, AWS (March 1992)
Nils Christensen Award, Golden, CO, AWS-CSM Student Chapter, (March, 1992)
AWS Fellow, Houston, TX, AWS (April 1993)
R. D. Thomas Award, Philadelphia, PA, AWS (April 1994)
Honorary Membership Award, Cleveland, OH, AWS (April 1995)
William Spraragen Award, Chicago, IL, AWS (April 1996)
Dean's Excellence Award, Colorado School of Mines (April 1997)
1998 Light Metals Reactive Metal Award, TMS, San Diego (March 1999)
1999 TTCP Achievement Award, U.S. Department of Defense, Pentagon, Washington, DC (April 2000)
Foreign Member of National Academy of Sciences (Materials Science) of Ukraine, Kiev (April 2000)
Arata Medal and Prize, International Institute of Welding, Ljubljana, Slovenia (July 2001)
William Spraragen Award, Chicago, IL, AWS (March 2002)
William Spraragen Award , Detroit, MI, AWS (April 2003)
CSM 2003 Faculty Senate Distinguished Lecturer, CSM (February 2004)
2004 ASNT Fellowship Award (Advisor-Student Award), Las Vegas, NV, ASNT (November 2004).
McKay-Helm Award, Dallas, Texas, AWS (April 2005)
2005 ASNT Fellows hip Award (Advisor-Student Award), Columbus, OH, ASNT (October 2005).
ASM Life Membership Award, (March 2007)

Service
ASM, Rocky Mountain Chapter (Chairman, 1981 82)
ASM Handbook Committee (l980 1992, Chairman 1990-1992)
ASM Joining Division Council (Chairman, 1983 85)
ASM Publication Council (1990 1992)
ASM AIME TMS Joint Commission on Met. Trans. (1990 1993)
AWS Welding Research and Development (1987 present, Chairman 1991-1993)
AWS Fellow Selection Committee (1990 1996)
AWS Nominating Committee (1993-1994)
Kiwanis Club, Golden (President, 1978 79)
Relations with Industry Representative (ASEE) for Colorado School of Mines (1972 1983)
Welding Research Council (University and Weldability Committees) (1978 present)
Marine Board (National Academy of Science) Committees, Committee of Marine Structures and
Material Advisory Group (1985 1990)
International Institute of Welding (IIW), United States Delegate to Commission IV and Expert to
Commissions I, II, IX, XII, Study Group 212 (1982 present)
National Materials Advisory Board (National Academy of Science) Committee on Advanced
Joining Technology 1981 82
Member of Independent Review Association which performed a critical review for D.O.E. of the
proposed National Strategy Document for T.R.U. nuclear waste disposal (1979)
Member of U.S. Technical Delegation to establish United States Indian Welding Research Program
(PL480 Funds) (1986), (1993).
Member of U.S. Delegation to the U.S.-Argentinean (USNSF-Argentinean AEC) Welding Research
Workshop, Buenos Aries, Argentina (Dec. 1992).
Member of the Board for Manufacturing Sciences, Inc., Boulder, Colorado (1982 1984)
Member of the Board of Directors, Associated Western Universities, Inc. (1989 1990)
Member (Key Reader) of Board of Review of Metallurgical Transactions A (1987 present),
(Chairman 1990)
Member of the Interim Board, the American Welding Technological Application Center (Now
AWI), Knoxville, TN, (1983 1984).
Member of Board, American Welding Institute, Knoxville, TN (1987 June 1993)
Member of Board, Colorado Innovation Foundation, Golden, CO (1988 1990)
Member of Board, "Colorado GEM Networking", Golden, CO (1991-1992)
Member of Board, Earth Resources Consortium, Denver, CO (1992-1994)
Member of Technical Advisory Committee, DOE-BES Welding Process Control and Project at
MIT and INEL (1987-1996)
Site Visitor for National Research Council (NRC) Research Assistantship
Program, Visited USBM Albany Research Center, September (1993).
Interim Executive Director, Colorado GEM, a Mineral Industry, State of Colorado and Colorado
School of Mines promotional and networking Organization (January 1990-June 1991).
Member, International Committee for the First International Conference on Materials and
Manufacturing (MATEHN '94), Technical University of Cluj-Napoca, Cluj-Napoca,
Romania, May 18-20 (1994).
Participant in U.S.-Russia NATO Cooperative Research Project on Synthesis of Advanced
Materials Using th

e SHS Process, with J. Moore and D. Readey, June (1994)
Focus Officer, DOD-TTCP Project on "Hydrogen and Preheat Management in Welded High
Strength Steel, PTP-1-S11 (1994-Present).
Member, Visiting Team to Review the Materials Program at Ben Gurion University of the Negev,
Beer-Sheva, Israel, March (1999).
U.S. Delegate to International Ship and Offshore Structure Congress (2000-2003)
Member, CSM Academy (1998-present)
Member, CSM Faculty Senate (2001-2002)
Member of James Douglas Gold Medal Committee, AIME (2004-2007)
Member of the Education Committee, TMS (2006-2009)
Review papers and proposals

Professional Societies
American Ceramics Society (ACS)
American Institute for Metallurgical Engineering (AIME TMS)
American Physical Society (APS)
American Nuclear Society (ANS)
American Society for Materials (ASM)
American Society for Non Destructive Testing (ASNT)
American Welding Society (AWS)
Iron and Steel Society (ISS) (25 years)
Materials Research Society (MRS)
National Association of Corrosion Engineers (NACE)
National Institute of Ceramic Engineers (NICE)
New York Academy of Science (NYAS) (1975)

Research Experience
Welding and Joining Processes
Welding Pyrometallurgy and Consumables
Welding Physical Metallurgy
Non-destructive Evaluation
Aqueous Corrosion
High Temperature Corrosion
Liquid Metal Corrosion
Corrosion Protection and Coatings
Phase Stability and Transformation
Reactive Metals Metallurgy and Technology
Actinide Metallurgy
Microstructural Evaluation in Thin Films
Engineering Alloys and Ceramics

Thesis Advisory
Completed: 37 Ph.D. Degrees, 73 MS Degrees
In Progress: 4 Ph.D. Candidates, 8 MS Candidates

 

Patents

1. D. L. Olson and A. M. Davila, "Cast Iron Welding Materials and Method", U.S. Patent 4,534,793 (August 13, 1985).

2. D. L. Olson and A. M. Davila, "Cast Iron Welding Materials", European Patent EP0038820 and West Germany Patent P3071827.5, November 12 (1986).

3. D. L. Olson and A. Davila Marquez, "Cast Iron Welding Electrodes", U.S. Patent Number 4,726,854, February 23 (1988).

4. R. D. Smith, D. K. Benson, T. R. Wildeman, and D. L. Olson, "Sensor for Testing the Diffusible Hydrogen Content of Welded Steel", U.S. Provisional Patent Application, NREL File No. PROV/99-03, June 7, 1999.

5. D. K. Benson, T. R. Wildeman, R. Davis Smith, and D. L. Olson, "Method of Apparatus for Determining Diffusible Hydrogen Concentrations", International Patent Classification: G01N 21/17, 2/01, 33/20; International Application Number: PCT/US00/15752 (June 8, 2000), International Publication Number W0 00/75634 Al, Publication Date December 14, 2000.

6. David K. Benson, Thomas R. Wildeman, R. Davis Smith and David L. Olson, "Method an Apparatus for Determining Diffusible Hydrogen Concentration", Australian Patent No. 762019, Standard Patent, Application Number AU 200054732B2/00, 2 October 2003.

7. David K. Benson, Thomas R. Wildeman, R. Davis Smith and David L. Olson, "Method an Apparatus for Determining Diffusible Hydrogen Concentration", United States Patent Number 7,306,951, December 11, 2007.

 

Books: Authored and Edited

1. D.L. Olson, "Surface Self Diffusion of Gold", Ph.D. Thesis, Cornell University, Diss. Abstr. Int. B 31, 2015 (1970).

2. D. L. Olson, "An International Workshop on Quality in Underwater Welding of Marine Structures",
Proceedings, Colorado School of Mines Press, Golden, Colorado, November 4-6, 1985

3. L. J. Korb and D. L. Olson (Coordinating Editors), Corrosion Handbook, ASM Handbook, vol. 13, ISBN: 0-87170-007-7 (TA459.M43), 1415 pages, ASM, Materials Park, Ohio (1987).

4. J. L. McCall, D. L. Olson, and I. LeMay, (Editors), "Metallography and Interpretation of Weld Microstructures", Symposium Proceedings, ISBN: 0-87170-293-2, Lib. of Congress #87-071104, pp. 1 393, ASM International, Materials Park, Ohio (1987).

5. D. L. Olson and C. E. Cross, "Curso de Actualizacion de Nivel Superior en Metalurgia de La Soldadura", Collection of Papers, Buenos Aires, Argentina, July 27 30 (1987).

6. D.L. Olson, "Welding Metallurgy", Course Taught in China, papers (three volumes) were translated to Chinese, Northwestern Polytechnical University, Xian, China, May (1988).

7. D. L. Olson, R. Dixon and A. L. Liby (Editors), Welding Theory and Practice, Materials Processing Theory and Practices Series, 8, ISBN: 0-444-87427-5 (TS227.W4154), pp. 1 389, North Holland Physics, Elsevier Science, NY, NY (1989).

8. D. L. Olson and T. A. North (Editors), Ferrous Alloy Weldments, 13 Chapters, ISBN: 087849-544-4, pp. 1-415, Trans. Tech. Publications, Ltd., Zurich, Switzerland March (1992).

9. D. L. Olson, T. A. Siewert, S. Liu, and G. R. Edwards (Coordinating Editors), ASM Handbook: Welding and Joining, 10th edition, vol. 6, pp. 1-1299, ISBN: 077170-382-3, ASM, Materials Park, OH (1993).

10. S. Liu, D.L. Olson, J. S. Spenser, and C. Smith (Editors), Proc. of International Workshop on "Underwater Welding of Marine Structures", held December 7-9, 1994, New Orleans, LA, pp. 1-451, ISBN: ISBN 0-918062-77-2, American Bureau of Shipping, New York, NY (1995).

11. J. L. Davidson and D. L. Olson (Editors), "Hydrogen Management in Steel Weldments", Conf. Proceedings, pp. 1-181, Melbourne, October 23, 1996, ISBN 0-7311-0809-4, WTIA, Brighton, Vic., Australia (1997).

12. G. R. Edwards, W. Hanzalek, S. Liu, D. L. Olson, and C. Smith (Editors), Proc. of International Workshop on Advanced Materials for Marine Structures, February 4-7, 1997, New Orleans, LA, pp. 1-522, ISBN: 00-918062-72-1, American Bureau of Shipping, New York, NY (1997).

13. J. E. M. Braid, C.V. Hyatt, D. L. Olson, and G. N. Vigilante, Hydrogen Management for Welding Applications, pp. 1-282, Proc. Intern. Workshop, October 6-8, 1998, ISBN: 0-662-27989-1, CANMET, Ottawa, Canada (1999).

14. G. R. Edwards, W. Hanzalek, S. Liu, D.L. Olson, and C. E. Smith, Proceedings of International Workshop on "Corrosion of Marine Structures and Pipelines", February 9-11, 1999, Galveston, Texas, ISBN 0-918062-14-4, pp. 1-526, American Bureau of Shipping, Houston, TX (2001).

15. B. Dixon, C. Smallbone, R. Phillips, and D. L. Olson, Proceedings on the International Conference on "Technological and Research Developments in Welded Defense Equipment", pp 1-266, 18-19 March, 2002, The Welding Technology Institute of Australia, Silverwater, NSW, 1811 (2002).

16. D. L. Olson, G.R. Edwards, P. Bollinger, A. N. Lasseigne and G. Atkins, "Materials and Practices to Improve Resistance to Fuel Derived Environmental Damage In Land and Sea- Based Turbines", Workshop Proceedings, EPRI Technical Report #1009173, pp.1-128, EPRI, Palo Alto, California, October (2003).

17. Charles Smith, Tom Siewert, Brajendra Mishra, David Olson and Angelique Lasseigne, "Coatings for Corrosion protection: Offshore Oil and Gas Operation Facilities, Marine Pipeline and Ship Structure", NIST Special Publication 1035, Proceedings of Workshop, Biloxi, Mississippi, April 14-16, 2004, NIST, Boulder, Co , (2005).

 

Publications: Interfaces and Advanced Materials

l. J. M. Blakely and D. L. Olson, "Intensity Distribution From a Sinusoidal Grating and Application to Diffusion Measurements", J. Appl. Phys. 39, 3476 3478 (1968).

2. D. L. Olson and J. M. Blakely, "Some Aspects of the Thermal Wave Technique in Solidification Studies", Scripta Met. 2, 351 356, (1968).

3. C. Newton and D. L. Olson, "A Chemical Mechanical Polish for Tungsten", Metallography 1, 249 250 (1968).

4. J. L. Nilles and D. L. Olson, "The Energy of a BCC Iron Deformation Twin Boundary", J. Appl. Phys. 41, 531 532 (1970).

5. D. L. Olson, H. R. Patil, and J. M. Blakely, "Influence of Contaminants on the Surface Self-Diffusion Coefficients of Gold", Scripta Met. 6, 229-240 (1972).

6. W. G. Brown and D. L. Olson, "The Effect of Carbon in Reaction Bonded Silicon Carbide", American Ceramic Bulletin 55 (3), 311 312 (1976).

7. S. M. Wong and D. L. Olson, "Phototransport Damage of Optical Materials", National Bureau of Standards Report on the "Laser Damage Symposium", NBS Report No. 462, 365 (1976).

8. D. L. Olson and D. K. Matlock, "The Hypothetical Diamond Cubic Phase of Lead", J. Phys. Chem. Solids, 42 (9), 805 808 (1981).

9. G. R. Edwards, D. L. Olson, G. P. Martins, B. R. Lanning and P. B. Maxwell, "Infiltration Kinetics and Interfacial Bond Strength in Aluminum Matrix SiC Composite", Proc. Eight Annual Discontinuous Reinforced Aluminum Material Working Group Meeting, Park City, Utah, January 14 16, 1986, MMICAC No. 000684, pp. 219 242, Kaman Tempo, Santa Barbara, California (November 1986).

10. D. L. Olson, G. P. Martins, D. Meendering, and S. Rawal, "Ceramic Bonding: Oxide Adhesives for Metal Matrix Composites", Proc. Eight Annual Discontinuous Reinforced Aluminum Material Working Group Meeting, Park City, Utah, January 14 16, 1986, MMCIAC No. 000684, pp. 281 292, Kaman Tempo, Santa Barbara, California (November 1986).

11. G. P. Martins, D. L. Olson and G. R. Edwards, "Modeling of Infiltration Kinetics for Liquid Metal Processing of Composites", Met Trans. 18 B, 95 101 (1987).

12. C. D. LeBail, C.A. Natalie, G. P. Martins and D. L. Olson, "Sol Gel Synthesis of MgAl204 Spinel Powders for Optical Ceramics", Proceedings of "1st International Conference on Ceramic Powder Processing", A. Cer. Soc., Orlando, FL, November 1 4 (1987); Ceramic Trans. 1, 211 217 (1988).

13. P. B. Maxwell, G. P. Martins, D. L. Olson, and G. R. Edwards, "The Infiltration of Aluminum into Silicon Carbide Compacts", Met. Trans. 21B (6), 475 485 (1990).

14. D. N. Meendering, G. P. Martins, and D. L. Olson, "Cathodic Electrodeposition of Hydrated Alumina from Aqueous Electrolytes", Innovations in Materials Processing Using Aqueous Colloid and Surface Chemistry, pp. 91 106, TMS, Warrendale, PA (1988).

15. G. P. Martins, D. L. Olson, G. R. Edwards, and P. B. Maxwell, "A Flow in Process Media Model for Describing Infiltration Kinetics", Proceedings Ninth Annual Discontinuously Reinforced MMC Working Group Meeting, pp. 585 599, Park City, Utah, January 6 8, 1987, DOD Metal Matrix Composites Information Analysis Center, MMCIAC No. 000695, Kaman Tempo, Santa Barbara, California 93102 1479.

16. B. R. Lanning, G. R. Edwards, and D. L. Olson, "A Semi Empirical Model for Predicting Properties of the Al/SiC Interface", Proc. of the "Eleventh Annual Discontinuously Reinforced MMC Working Group" Meeting, Park City, Utah, February 14 16, 1989, Conf. Proc. Series MMCIAC No. 716, pp. 441 458, Santa Barbara, California, July (1989).

17. P. R. Chidambaram, G. R. Edwards, and D. L. Olson, "Fundamental Issues Concerning the Microdesigning of Metal-Ceramic Interfaces", Presented at Fourth International Conference on Composite Interfaces (ICCI-IV), Composite Interfaces 1, pp. 127-140 (1993).

18. B. Mishra, D. L. Olson, and C. E. Cross, "Selection of Resilient Constituent Parameters for Achieving Composite Properties", Proc. of International Conference on "Advanced Synthesis of Engineered Structures", August 30-September 2, 1992, pp. 125-131, San Francisco, CA (1992).

19. S. Govindarajan, J. J. Moore, B. Mishra, and D. L. Olson, "Physical Vapor Deposition of Molybdenum and Silicon Thin Films", Surface and Coating Technology 68/69, pp. 45-50 (1994).

20. W. Grant, C. Loomis, J. J. Moore, B. Mishra, A. J. Perry, and D. L. Olson, "The Application of Statistical Analysis of Experiments for the Arc Ion Plating (AIP) of TiN", Proc. of Intn. Conf. on Metallic Coatings and Thin Films, pp. , San Diego, CA (1994).

21. S. Govindarajan, J.J. Moore, B. Mishra, D. L. Olson, T. Ohno, and J. Disam, "On the Possibility of Tailoring a Compositional Gradient in Thin Films Sputtered from a MoSi2+XSiC Composite Target", Int. Conf. on Met. Coatings and Thin Films, ICM CTF 96, Paper A1.13, Surface and Coatings Technology 86-87, pp. 33-40 (1996).

22. S. Govindarajan, H. J. Feng, J. J. Moore, D. L. Olson, B. Mishra, and E. A. Levashov, "Reactive Synthesis of Composite Targets Used in Physical Vapor Deposition of Thin Films", Processing and Fabrucation of Advanced Materials IV, pp. 795-802, TMS, Warrendale, PA (1996).

23. S. Govindarajan, J. J. Moore, D. L. Olson, B. Mishra, T. Ohno, E. A. Levashov, and J. Disam, "Composite Thin Films Produced Using Physical Vapor Deposition of Composite Targets, Proceedings of Processing and Fabrication of Advanced Materials IV, pp. 275-286, TMS, Warrendale, PA (1996).

24. S. Thavornum, B. Mishra, J. J. Moore, and D. L. Olson, "Development of Stainless Steel Clad Alloy Steels Bars", Proceedings of Processing and Fabrication of Advanced Materials IV, pp. 79-96, TMS, Warrendale, PA (1996).

25. S. Charoenvilaisiri, B. Mishra, J. J. Moore, and D. L. Olson, "Glass-Fiber Reinforced Formable Steel Composite", Proceedings of Processing and Fabrication of Advanced Materials IV, pp. 471-490, TMS, Warrendale, PA (1996).

26. K. A. Lindahl, D.L. Olson, J. J. Moore, A. Swartzlander, and R. Noufi, "Quantitative Investigation of Reactions in Copper-Indium-Gallium Multilayer Thin Films", pp. 949-952, IEEE 25th PVSC Conference, Washington, DC (1996).

27. S. Govindarajan, B. Mishra, D. L. Olson, and J. Disam, "Synthesis of Molybdenum Disilicide on Molybdenum Substrate", Surface and Coatings Technology, 76-77, pp. 7-13 (1995).

28. K. A. Lindahl, J. J. Moore, D. L. Olson, R. Noufi, and B. Lanning, "Quantitative Investigation of Copper/Indium Multilayer Thin Film Reactions", Paper HH05, ICMCTF96, San Diego, CA, April (1996), Thin Solid Films 290-291, pp. 518-524 (1996).

29. W. K. Grant, C. Loomis, J. J. Moore, D. L. Olson, B. Mishra, and A. J. Perry, "Characterization of Hard Chromium Nitride Coatings Deposited by Cathodic Arc Vapor Deposition", Proc. ICMCTF96 Conference, pp. 1-18, San Diego, CA, April (1996), Surface and Coating Tech., 86-87, pp. 788-796 (1996).

30. E.A. Levashov, V. I. Kosayanin, L. M. Krukova, J. J. Moore, and D. L. Olson, "Structure and Properties of Ti-C-B Composite Thin Films Produced by Sputtering of Composite TiC-TiB2 Targets", Surface and Coating Technology, 92, pp. 34-41 (1997).

31. Y. Andreev, E. A. Levashov, A. Sheveiko, V. I. Kosianin, J. J. Moore, and D. L. Olson, "Electrochemical Corrosion Behavior of SHS-Synthesized D.C. Magnetron Composite TiC-Based Targets and Sputtered Thin Films", Surface and Coating Technology, 90, pp. 42-52 (1997).

32. H. J. Moore, D. L. Olson, and R. Noufi, "Use of Effective Heat of Formation to Determine Phase Formation Sequences of In-Se, Ga-Se, Cu-Se and Ga-In Thin Films", J. Elect. Mats., vol. 27 (12), pp. 1334-1340 (1998).

33. H J. Moore, D. L. Olson, and R. Noufi, "Determination of Phase Formation Sequences and Activation Energies of Copper Indium Gallium, and Selenium Thin Films", Paper H7-2-11, ICMCTF98, San Diego, CA, April (1998).

34. H. J. Moore, D. L. Olson, and R. Noufi, "Elucidation of the Reaction Sequences of Binary and Ternary Systems in CIGS", Proc. of Int. Conf. on Metallurgical Coatings and Thin Films", Paper H1-9, San Diego, CA, American Vacuum Society, April 12 (1999).

35. H. J. Moore, D. L. Olson, and R. Noufi, "Thermodynamic Consideration of CIGS Thin Film Formations", Proc. E-MRS, Spring Meeting, Strasbourg, France, June (1999).

36. D. Eliezer, N.Eliaz, D. Zander and D. L. Olson, "Hydrogen Assisted Material Processing" in Hydrogen Effects on Materials Behavior and Corrosion Deformation Interactions", pp.315-328, TMS, Warrendale, PA (2003).

37. D. Zander, B. Kofmann, D. Eliezer, E. Y. Gutmanas, E. Abramov and D. L. Olson, "Influence of Hydrogen on the Phase Stability and Microhardness in Ti-Nb", in Hydrogen Effects on Materials Behavior and Corrosion Deformation Interactions, pp.345-354,TMS, Warrendale, PA (2003).

38. S. Niyomsoan, W. Grant, D. L. Olson, and B. Mishra, "Variation of Color in Titanium and Zirconium Nitride Decorative Thin Films", Thin Solid Film, 415, pp. 187-194 (2002).

39. D. Zander, D.L. Olson and D. Eliezer, "Mutual Effects of Hydrogenation and Deformation inTi-Nb, Met. Mat. Trans. Vol. 34A (10) pp 2199-2206 (2003).

40. D. Zander, I. Maroef, D. Olson, and D. Eliezer, "Positive Effects of Hydrogen on the Plasticity of 2 ¼ Cr- 1 Mo Steel", J. of Alloys and Compounds, vol. 356-357 pp 809-812 (2003).

41. P. Termsuksawad, S. Niyomsoan, R. B. Goldfarb, V. I. Kaydanov, D. L. Olson, B. Mishra, Z. Gavra, "Measurement of Hydrogen in Alloys by Magnetic and Electric Techniques", Journal of Alloys and Compounds, Vol.373 (1-2), pp. 86-95 (2004).

42. Y. D. Park, D. L. Olson, B. Mishra and Z. Gavra, " Characterization and Prediction of Hydrogen Storage Alloys by Using Electronic Measurements" pp. 69-75, in Proc. 6tth Intl Conf. on New Energy Systems and Conversions, Nov. 9-13, 2003, Busan, Korea (2003).

43. B. Mishra, D. L. Olson, P. Termsuksawad, "Sensing of Hydrogen in Advanced Ni-MH Battery Materials", in Advanced Materials for Energy Conversion II, pp 111-120, TMS, Warrendale, PA, (2004).

44 Y. D. Park, D. L. Olson, A. Landau, and M. Pinkas, "Assessment of Hydrogen cracking in UNS No 05500 Using TEP and XRD Analysis", International Proceedings of NACE 2004, Paper No. 04265, NACE, Houston, TX (2004).

45. S. Niyomsoan, , R. B. Goldfarb, D. L. Olson, V. Kaydanov, Z. Gavra, B. Mishra, V. Kaydanov, Z. Gavra and P. Termsuksawad, 'Hydrogenation of the Zr0.9 Ti 0.1 Cr(x) Fe 2-x Intermetallic Compounds: "Free Electron Model for Magnetic Susceptibility and Thermoelectric Power", submitted to J. Alloys and Intermetallic Compounds (2006).

46 S. Niyomsoam, P. Termsuksawad, D. L. Olson, B. Mishra, V. I. Kaydanov, and Z. Gavra, " The Relationship between the Thermoelectric Power and Phase Transformation in AB2 Hydrogen Storage Materials", submitted to Mat. Sci. Eng. A vol. 391, (1-2) pp 264-271 January 25 (2005).

47. P. Termsuksawad, S. Niyomsoan, B. Mishra, D. L. Olson, Z. Gavra, and V. I. Kaydanov," Prediction of Hydrogen Absorption Behavior in AB5 Hydrogen Storage Alloys by Electronic Techniques", Materials Science and Engineering B, vol.117 (1) , pp 45-51, February 25 (2005).

48. Yeong-do Park, David L. Olson and Brajendra Mishra, Studies on Hydrogen Absorption Properties of LaNi5-xSnx and La0.95 Ni4.6 Sn0.3 alloys using Magnetic and Thermoelectric Power Measurements, J. Intn. Metals and Alloys, (2004).

49. D. Olson and B. Mishra, "Report of the Findings of MMS Offshore Coating Workshop: Reported earlier in NIST Publ. #1035, Coatings for Corrosion Protection: Offshore oil and Gas Operation Facilities, Marine Pipelines and Ship Structures" edited by C. Smith, T. A. Siewert, B. Mishra, D. L. Olson and A. Lasseigne, April 14-16, 2004, Biloxi, Miss., Proceedings of Advanced Coatings Rand D for Pipelines and Related Facilities, NIST Spec. Report # 1044, edited by R. E. Ricker, pp. 16-28, NIST, Gaithersburg, MD, Sept. 7,
2005.

50. A.N. Lasseigne, I. Ashraf, B. Mishra, and D.L. Olson Characterization of Hydrogen Storage Capabilities of the Two-Phase Region of LaNi5", paper and presentation accepted for TMS 2006: Linking Science and Technology for Global Solutions in San Antonio, Texas, (2006).

51. A.N. Lasseigne, I. Ashraf, B. Mishra, D.L. Olson, V. Kaydanov, and R. Goldfarb, "Characterization of Hydrogenation Behavior of NaAlH4 Utilizing Thermoelectric Power and Magnetic Analyses" paper and presentation accepted for TMS 2006: Linking Science and Technology for Global Solutions in San Antonio, Texas, (2006).

52. J.E. Jackson, Y.D. Park, A.N. Lasseigne, C. Sangphagdee, D.L. Olson, B. Mishra, and V. Kaydanov, "Characterization of Engineering Materials Utilizing Thermoelectric Power Measurements", Materials in Clean Power Systems: Applications, Corrosion, and Protection, Edited by Z.G. Yang, K.S. Weil, and M.P. Brady, TMS (The Minerals, Metals & Materials Society) Annual Meeting, pp. 1-10 (2006).

53. A.N. Lasseigne, B. Mishra, and D.L. Olson, "Characterization of Hydrogen Storage Capability in Advanced Battery Materials", Proc. ICAMMP 2006, III, PP 937-948, Khanaspur, India, February 3-5, 2006.

54. J.E. Jackson, D.L. Olson, B. Mishra, and A.N. Lasseigne, "Deposition of Al-Si Metallic Coating Precursor on Mo-Si-B Turbine Materials", paper and presentation accepted for TMS 2006: Linking Science and Technology for Global Solutions in San Antonio, Texas (2006).

55. P. Termsuksawad, S. Niyomsoan, B. Mishra, D. L. Olson, Z. Gavra, and V. I. Kaydanov, " Effect of Hydrogen Absorption on the Magnetic and Thermoelectric Power (TEP) Properties of AB5 Hydrogen Storage Alloys", to be reviewed 1st. by NIST before submission, (2005).

56. S. Niyomsoan, D. L. Olson, R. B. Goldfarb, V. I. Kaydanov, Z. Gavra, B. Mishra and P. Termsuksawad, "Free Electron Model Relation of Magnetic Susceptibility and Seebeck Coefficent as Applied to Hydrogenation of
the Zr0.9Ti0.1CrxTi1-x Intermetallics, to be reviewed 1st by NIST before submission, (2005).

57. Glen Bigelow, Ronald Noebe, Santo Padula II, , Anita Gary, and David Olson, "Development and Characterization of Improved High- Temperature Shape-memory Alloys by Solid Solution Strengthening and Thermomechanical Processing, Conference Proc. of SMST 2006 , (2006).

58. J.E. Jackson, D. L. Olson, B. Mishra and A. N. Lasseigne, "Deposition and Characterization of Al-Si Metallic TBC Precursor on Mo- Si-B Turbine Materials", J. of Hydrogen ----, pp. (2006).

59. B. Mishra, A. N. Lasseigne, and D. L. Olson,"Development of Sensors for Reversible Battery Hydrogen Storage Materials", Proc. of International Congress on Innovative Solutions for the Advancement of the Transport Industry", October 4-6, 2006, San Sebastian, Spain (2006).

60. B. Mishra , A. N. Lasseigne , and D. L. Olson, " Development of High Interstitial Stainless Steels with increased Mechanical Properties and Corrosion Resistance", October 4-6, 2006, San Sebastian, Spain (2006).

61. J.E. Jackson, Y.D. Park, A.N. Lasseigne, C. Sangphagdee, D.L. Olson, B. Mishra, and V. Kaydanov, "Characterization of Engineering Materials Utilizing Thermoelectric Power Measurements", Materials in Clean Power Systems: Applications, Corrosion, and Protection, Edited by Z.G. Yang, K.S. Weil, and M.P.
Brady/, TMS (The Minerals, Metals & Materials Society) Annual Meeting, pp. 1-10 (2006).

62 A. N. Lasseigne, M. A. Inam, V. Kaydanov, B. Mishra, and D. L. Olson, "Chatacterization of Hydrogenization Behavior of NaAl H4 Utilizing Thermoelectric Power and Magnetic Analyses", Advanced Materials for Energy Conversion III, pp 199-206, TMS, Warrendale, PA (2006).

63. A. N. Lasseigne, M. A. Inam, Y. D. Park, V. I. Kaydanov, B. Mishra, and D. L. Olson, " Characterization of Hydrogen Storage Capabilities of the Two-Phase Region of LaNi5", Advanced Materials for Energy Conversion III, pp.127-136, TMS, Warrendale, PA (2006).

64. J.E. Jackson, D.L. Olson, B. Mishra, and A.N. Lasseigne, "Deposition of Al-Si Metallic Coating Precursors on Mo-Si-B Turbine Materials", /TMS 2006 Annual Meeting, MPMD 7th Global Innovations Proceedings: Trends in Materials R&D for Sensor Manufacturing Technologies/, Edited by I.E. Anderson, N.R. Moody, J.W. Sears, D.F. Bahr, H.L. Fraser, and J.E. Smugeresky/, /TMS (The Minerals, Metals & Materials Society) Annual Meeting, pp. 39-48 (2006)/

65. J. E. Jackson, Y.D. Park, A.N. Lasseigne, C. Sangphagdee, D.L. Olson, B. Mishra, and V. Kaydanov,
"Characterization of Engineering Materials Utilizing Thermoelectric Power Measurements", Materials in Clean Power Systems: Applications, Corrosion, and Protection, Edited by Z.G. Yang, K.S. Weil, and
M.P. Brady, TMS (The Minerals, Metals & Materials Society) Annual Meeting, pp. 1-10 (2006).

66. A. N. Lasseigne, M. A. Inam, V. Kaydanov, B. Mishra, and D. L. Olson, "Chatacterization of Hydrogenization Behavior of NaAl H4 Utilizing Thermoelectric Poser and Magnetic Analyses", advanced Materials for Energy Cponversion IIIm pp199-206, TMS, Warrendale, PA (2006).

67. A. N. Lasseigne, M. A. Inam, Y. D. Park, V. I. Kaydanov, B. Mishra, and D. L. Olosn, " Characterization of Hydrogen Storage Capabilities of the Two-Phase Region of LaNi5", Advanced Materials for Energy Conversion III, pp.127-136, TMS, Warrendale, PA (2006).

68. A. N. Lasseigne -Jackson, B. Mishra, D. L. Olson and J. E. Jackson, "Reversible Hydrogen Storage
Battery Materials: Non-Destructive Sensor Development", Proc. of NHA Annual Hydrogen Conference
2007, Paper #3535, San Antonio, TX., March 18-22 (2007).

69. A.N. Lasseigne-Jackson, J.E. Jackson, D.L. Olson, B. Mishra, "Non-Destructive Hydrogen Storage Material Fuel Gauge and Diagnostic Tool", Proceedings of 2007 Commercial Vehicle Engineering Congress and Exhibition, Paper 2007-01-4272, pps 6,SAE International.

70. C. Sangphagdee, A.N. Lasseigne-Jackson, J.E. Jackson, D.L. Olson, and B. Mishra, ""Use of Torsional Fatigue to Produce Simulated Radation Damage of Stainless Steel Assessed with TEP Measurements", to be published in
.
71. A.N. Lasseigne-Jackson, B. Mishra, D.L. Olson, and J.E. Jackson, "Reversible Hydrogen Storage Battery Materials: Non-Destructive Sensor Development", for publication in the proceedings of the National Hydrogen Association, San Antonio, TX, March 19-22, 2007.

72. A. N. Lasseigne-Jackson, B. Mishra, and D. L. Olson. "Characterization of
Hydrogen Storage Capabilities in Advanced Battery Materials" Materials and Manufacturing Processes, vol. 22, pp. 433-439 (2007).

73. J.E. Jackson, A.N. Lasseigne-Jackson, F.J. Sanchez, D.L. Olson, and B. Mishra, "Inspection-Related Magnetization Effect on Corrosion in Linepipe Steel: Thermodynamic and Kinetic Interpretations", Proceedings of the American Society for Non-Destructive Testing Fall 2006 Conference, October 23-27 (2006).

74. J.E. Jackson, D.L. Olson, A.N. Lasseigne-Jackson, B. Mishra , and T.A. Siewert, "Correlating the Influence of Magnetic Field on Solute Content in Metals Using the Thermodynamic Auxiliary Work Functions", Properties and Processes for a Hydrogen-based Economy, Sixteenth Symposium on Thermophysical Properties, July 30 - August 4, 2006, Boulder, Colorado, U.S.A.

75. J.E. Jackson, A.N. Lasseigne-Jackson, F.J. Sanchez, D.L. Olson, and B. Mishra, "The Influence of Magnetization on Corrosion in Pipeline Steels", Proceedings of the 6th International Pipeline Conference, September 25-29, 2006, Calgary, Alberta, Canada (2006).

76. A.N. Lasseigne-Jackson, J. Anton, J.E. Jackson, D.L. Olson, and B. Mishra, "Development of Electromagnetic Techniques for Hydrogen Content Assessment in Coated Linepipe", Rev. QNDE 2006, pp. 1159-116, American Institute of Physics, Melville, N. Y. (2007).

77. J.E. Jackson, D.L. Olson, A.N. Lasseigne-Jackson, B. Mishra , and T.A. Siewert, "Using the Thermodynamic Auxiliary Work Functions to Correlate the Magnetic Field Influence on Solute Content in Metals", to be published in the International Journal of Thermophysics (2007).

78. J.E. Jackson, A.N. Lasseigne-Jackson, F.J. Sanchez, D.L. Olson, and B. Mishra, "Inspection-Related Magnetization Effect on Corrosion in Linepipe Steel: Thermodynamic and Kinetic Interpretations", Proceedings of the American Society for Non-Destructive Testing Fall 2006 Conference, October 23-27 (2006).

79. J.E. Jackson, D.L. Olson, A.N. Lasseigne-Jackson, B. Mishra , and T.A. Siewert, "Correlating the Influence of Magnetic Field on Solute Content in Metals Using the Thermodynamic Auxiliary Work Functions", Properties and Processes for a Hydrogen-based Economy, Sixteenth Symposium on Thermophysical Properties, July 30 - August 4, 2006, Boulder, Colorado, U.S.A.

80. J.E. Jackson, A.N. Lasseigne-Jackson, F.J. Sanchez, D.L. Olson, and B. Mishra, "The Influence of Magnetization on Corrosion in Pipeline Steels", Proceedings of the 6th International Pipeline Conference, September 25-29, 2006, Calgary, Alberta, Canada (2006).

81. A.N. Lasseigne-Jackson, J. Anton, J.E. Jackson, D.L. Olson, and B. Mishra, "Development of Electromagnetic Techniques for Hydrogen Content Assessment in Coated Linepipe Steel", in Proc. QNDE Conf. 2006, Portland, OR, American Institute of Physics, Melville, N. Y. (2006).

82. J.E. Jackson, D.L. Olson, A.N. Lasseigne-Jackson, B. Mishra , and T.A. Siewert, "Using the Thermodynamic Auxiliary Work Functions to Correlate the Magnetic Field Influence on Solute Content in Metals", to be published in the International Journal of Thermophysics (2007).

83. J.E. Jackson, D.L. Olson, B. Mishra, and A.N. Lasseigne, "Deposition of Al-Si Metallic Coating Precursors on Mo-Si-B Turbine Materials", TMS 2006 Annual Meeting, MPMD 7th Global Innovations Proceedings: Trends in Materials R&D for Sensor Manufacturing Technologies, Edited by I.E. Anderson, N.R. Moody, J.W. Sears, D.F. Bahr, H.L. Fraser, and J.E. Smugeresky, TMS (The Minerals, Metals & Materials Society) Annual Meeting, pp. 39-48 (2006).

84. J.E. Jackson, D.L. Olson, B. Mishra, and A.N. Lasseigne-Jackson, "Development of Advanced Thermal Barrier Coatings for Mo-Si-B materials", for publication in the proceedings of TMS 2007 Conference, Orlando, FL, February 27-March 1, 2007.

85. J.E. Jackson, D.L. Olson, B. Mishra, and A.N. Lasseigne-Jackson, "Deposition and Characterization of Al-Si Metallic TBC Precursor on Mo-Si-B Turbine
Materials", International Journal of Hydrogen Energy, Vol. 32,pp. 3789-3796 November (2007).

86. J.E. Jackson, A.N. Lasseigne-Jackson, T. Koenig, D.L. Olson, and B. Mishra, "Development of Graded-Architecture Mullite Thermal Barrier Coating on Mo-Si-B Turbine Materials", to be presented at ASME Turbo Expo 2007 November, ASME GT2007-29740 (2007).

87. J.E. Jackson, Y.D. Park, A.N. Lasseigne, C. Sangphagdee, D.L. Olson, B. Mishra, and V. Kaydanov, "Characterization of Engineering Materials Utilizing Thermoelectric Power Measurements", Materials in Clean Power Systems: Applications, Corrosion, and Protection, Edited by Z.G. Yang, K.S. Weil, and M.P. Brady, TMS (The Minerals, Metals & Materials Society) Annual Meeting, pp. 1-10 (2006).

88. A.N. Lasseigne Jackson, A. Zamarron, I. Ashraf, B. Mishra, and D. L. Olson, "Thermoelectric Power Hydrogen Sensors for Reversible Hydrogen Storage Materials", PRICM 6, Materials Science Forum, Vols. 561-565 (2007), pp. 1633-1636.

89. J. E. Jackson, D. L. Olson, S. Liu, R. Hellner, A. N. Lasseigne-Jackson and C. Trickell," Calibration of Electronic Property Measurements with Larson- Miller Parameter for Service Life assessment", Proc. Boiler Tube and HRSG Tube Failure and Inspection Conference, Oct. 2007, Calgary, Alberta , Canada.

90. S. Kundu, S. Chatterjee, B. Mishra and David Olson, " Interface Microstructure and Strength Properties of the Diffusion Joints of Titanium-Cu Interlayer- Stainless Steel", Met. Trans. A, ( 2008).

91. D. L. Olson, V. I Kaydanov, Alex Landau, Malki Pinkas, and A. N. Lasseigne- Jackson, "Application of Interdisciplinary Fundamentals to Achieve New Insight into Materials Properties, Stability and Integrity, Proc. QNDE 2007, Golden Colorado (2007).

92. J. E. Jackson, B. Mishra and D. L. Olson, "The Future of Microstructural Characterization: Ana Electron Metallography Laboratory", Proc. QNDE 2007, Golden Colorado (2007).

93. A. L. Lasseigne-Jackson, J. M Anton and T. A. Siewert, D. L. Olson, B. Mishra and J. E. Jackson, " Advanced Nondestructive Measurement Schemes to Actively Monitor Hydrogen Content in Steel Pipeline", Proc. QNDE 2007, Golden Colorado (2007).

94. D. E. Dooley, D. l. Olson, and F. E. Gibbs, Monitoring Homogenization of Cerium-Lathanium Alloys Using Thermoelectric Power and Electrical Resistivity, Proc. QNDE 2007, Golden Colorado (2007).

95. A. Landau, M. Pinkas, A. N. Lasseigne-Jackson, and D. Olson, "Developing a Monitoring Tool to Assess the Fatigue Damage in Ni-Based Superalloys Using Thermoelectric Power Measurements", Proc. QNDE 2007, Golden Colorado (2007).

96. S. Niyomosoan, P. Termsuksawad, R. Goldfarb, D. L. Olson, B. Mishra, Hydrogenization of Intermetallic Compounds Characterized by Magnetic Susceptibility and Thermoelectric Power Measurement, in CP975, Review of Quantitative Nondestructive Evolution, Vol. 27, pp. 1109-1116, American Institute of Physics, ed. D.O. Thompson and D. E. Chimenti, (2008),

97. Y. D. Park, Y. D. Kim , and D. L. Olson, "Study on In-Situ Diffusion Hydrogen Sensor for Welded HSLA Steel", Proc. QNDE 2007, Golden Colorado (2007).

98. D. L. Olson, " Non-Destructive Physical Property Measurement to Establish Materials State Awareness", Proc. of National Academies Workshop on Materials State Awareness", Sept. .25-26, 2007, Woods Hole, Mass., pp 1-10, National Materials Advisory Board, Washington, D.C.

 


Publications: Reactive Metals and Corrosion

1. D. L. Olson, J. L. Blough, and D. A. Rigney, "Electro Transport in Liquid NaK", Scripta Met. 4, 1023 1032 (1970).

2. T. S. Lakshmanan, D. L. Olson, and D. A. Rigney, "Electrotransport in Liquid Na Rb Alloys", Scripta Met. 5, 1099 1104 (1971).

3. D. L. Olson, J. L. Blough, and D. A. Rigney, "Electrotransport in Monovalent Liquid Alloys", Acta Met. 20, 305 312 (1972).

4. D. L. Olson and J. L. Blough, "Volume Thermal Expansion Coefficients for Liquid Na K Alloys", Nuclear Technology 13, 301 302 (1972).

5. J. L. Blough, D. L. Olson, and D. A.. Rigney, "Composition of Electrotransport Reversals in Certain Liquid Alloys", J. Appl. Phys. 43, 2476 2477 (1972).

6. D. L. Olson and D. A. Rigney, "Proposed Ultraviolet Band Filters", Rev. Sci. Instru. 43, 2476 1248 (1972).

7. J. L. Blough, D.L. Olson, and D. A.. Rigney, "Electrotransport in Liquid Na K Alloys", Mat. Sci. and Eng. 11, 73 76 (1973).

8. D. L. Olson, and J. L. Blough, T. S. Lakshmanan, and D. A.. Rigney, "Computer Simulation of Chemical Profiles During Electrotransport", Comp. Physics Comm. 5, 430 436 (1973).

9. T. S. Lakshmanan, D. L. Olson, and D.A.. Rigney, "Electrotransport of Liquid Alloys", Trans. Indian Institute of Metals 27 (3), 120 124 (1974).

l0. G. A.. Minick and D. L. Olson, "The Effects of Columbium in Inhibiting Intergranular Corrosion of Stainless Steel Castings", Materials and Corrosion Protection (NACE) 14, 41 43 (1975).

11. R.A. Patterson , R. J. Schlager, and D. L. Olson, "Liquid Lithium Penetration and Corrosion Kinetics of Stainless Steel 304L", Nuclear Materials 27, 312 (1975).

12. R. J. Schlager, D. L. Olson, and W. L. Bradley, "Analytical Determination of Nitride Nitrogen in Lithium Coolants", Nuclear Technology 27 (3), 439 441 (1975).

13. R. J. Schlager, R. A. Patterson, D. L. Olson, and W. L. Bradley, "Stainless Steel Weight Loss in Nitrogen Contaminated Liquid Lithium", Nuclear Technology 29 (1), 94-97 (1976).

l4. W. Jordan, W. L. Bradley, and D. L. Olson, "Liquid Lithium Penetration of Stressed Armco Iron", Nuclear Technology 29 (2), 209-214 (1976).

15. J. A. Reeves, Jr., D. L. Olson, and W. L. Bradley, "Grain Boundary Penetration Kinetics of Nitrided 304L Stainless Steel", Nuclear Technology 30 (3), 385 389 (1976).

16. B. Craig and D. L. Olson, "Corrosion at a Holiday in an Organic Coated Metal Substrate System", Corrosion 32 (8), 316 321 (1976).

17. D. L. Olson and W. L. Bradley, "The Corrosion of Ferrous Alloys in Nitrogen Contaminated Liquid Lithium", Proceedings of the International Conference on "Liquid Metal Technology in Energy Production", ERDA Conference Report No. 760503 P1, 446 (1976).

18. L. B. Whitefield, D. L. Olson, and W. L. Bradley, "Grain Boundary Grooving of Pure Iron in Nitrogen Contaminated Liquid Lithium", Nuclear Science and Engineering 62, 157 162 (1977).

19. T. A.. Whipple, D. L. Olson, W. A.. Bradley, and D.K. Matlock, "Mechanical Behavior of Iron in Lithium", Nuclear Tech. 39 (1), 75 83 (1978).

20. D. L. Olson and D. K. Matlock, "The Essential Physical and Chemical Properties of Ferrous Alloys Needed for Containment of Liquid Lithium", Energy Journal 3, 315 323 (1978).

21. W. A. Averill and D. L. Olson, "Review of the Extractive Metallurgy of Lithium from Brines and Ores", Energy Journal 3, 305 313 (1978).

22. D. A. Bates, G. R. Edwards, and D. L. Olson, "An Evaluation of Engineering Alloys for High Temperature Lithium Containment", Materials Performance 19 (3), 40 48 (1980).

23. J. Selle and D. L. Olson, "Liquid Lithium Compatibility Research Status and Requirements for Ferrous Alloys, published in NACE book Materials Considerations in Liquid Metal Systems in Power Generation, 15 22 (1978).

24. D. L. Olson, G. N. Reser, and D. K. Matlock, "Liquid Lithium Corrosion Rate Expressions for 304L Stainless Steel", Corrosion 36 (3), 140 144 (1980).

25. D. L. Hammon, S. K. DeWeese, D. K. Matlock, and D. L. Olson, "Evaluation of Mechanical Properties of Materials in Liquid Lithium", Closed Loop 9, 3 11 (1979).

26. R. Spencer, S. K. DeWeese, D. K. Matlock, and D. L. Olson, "Fatigue Crack Propagation Characteristics of 2 1/4 Cr 1 Mo Steel in Liquid Lithium at 773K", Met. Trans. 11A (10), 1759 61 (1980).

27. D. K. Matlock, R. E. Spencer, D. L. Hammon, T. A.. Whipple, and D. L. Olson, "Interrelationship Between Corrosion and Deformation Processes of Materials in Liquid Lithium", Proceedings of Second International Conference on "Liquid Metal Technology in Energy Production", April 14 2, 1980, Richland, Washington, Section 22, 32 39 (1980).

28. T. R. Pinchback, J. R. Winkel, D. K. Matlock, and D. L. Olson, "Corrosion of Structural Alloys in Liquid Rubidium", Nuclear Technology, 54 (2), 201 207 (1981).

29. W. A. Averill, D. L. Olson, D. K. Matlock, and G. R. Edwards, "Lithium Reactivity and Containment", Conf. Book on "Aluminum Lithium Alloys", Stone Mountain, Georgia, (May 1980), AIME Publication, pp. 8 28 Warrendale, PA, (1981).

30. P. A. Steinmeyer, D. L. Williamson, D. L. Olson, and D. K. Matlock, "A Mossbauer and Weight Loss Study of a Lithium Corroded Austenitic Stainless Steel", J. Mat. Energy Systems, 2 (3), 34 36 (1981).

31. D. L. Hammon, D. K. Matlock, and D. L. Olson, "The Effect of Liquid Lithium on Fatigue Crack Propagation in Type 304L Stainless Steel at Elevated Temperatures", J. Mat. Energy Systems, 2 (3), 26 33 (1981).

32. D. L. Hammon, C. J. Coubrough, D. K. Matlock, and D. L. Olson, "The Influence of Cyclic Loading on the Lithium Corrosion Behavior of Reactor Materials", Proceedings of "Second Topical Meeting on Fusion Reactor Materials", Seattle, Washington, (August 9 12, 1981), J. Nucl. Mats. 104, 663 668 (1981).

33. P.A. Steinmeyer, D. L. Olson, and D. K. Matlock, "The Nature of the Ferrite Layer on Lithium Corroded Type 304L Austenitic Stainless Steel", J. Mat. Energy Systems 4 (2), pp. 84 91 (1982).

34. R. E. Spencer, D. K. Matlock, and D. L. Olson, "The Effects of Liquid Metal Embrittlement on High Temperature Fatigue of 2 1 1/4 Cr 1 Mo Steel in Liquid Lithium", J. Mat. Energy Systems 4 (4), 187 194 (1983).

35. D. K. Matlock, G. R. Edwards, and D. L. Olson, "Evaluation of the Fatigue Resistance in Lithium at 270 C of Seamless Type 321 Stainless Steel Bellows", Hanford Engineering Development Laboratory, HEDL TME 82 42; UC 20, Section 4, Richland, Washington (September 1981).

36. D. K. Matlock, G. R. Edwards, and D. L. Olson, "Fatigue Crack Propagation Characteristics of Stainless Steel in Liquid Lithium in the Development Laboratory Report HEDL TME 82 42; UC 20, Section 3, Richland, Washington (September 1981).

37. P.A. Steinmeyer, D. L. Olson, D. K. Matlock, and G. R. Edwards, "Review of Corrosion Phenomena in Molten Lithium", International Journal of Review on Coatings and Corrosion, 4, (4), pp. 349 434 (1981).

38. D. L. Hammon, D. K. Matlock, and D. L. Olson, "Embrittlement of Engineering Materials During High Temperature Fatigue in Liquid Lithium Environment", Conference Proceedings: Embrittlement by Liquid and Solid Metals, AIME Warrendale, PA, pp. 549 562 (1984).

39. G.A. Minick and D. L. Olson, "Corrosion in the Mineral Industry", ASM Handbook 13, 1294 1298, ASM, Materials Park, Ohio (1987).

40. B. Mishra, P. D. Ferro, D. L. Olson, J. J. Moore, and W. A. Averill, "Electrowinning of Calcium for In-Situ Direct Reduction of Metal Oxides", Extended Abstracts of Electrochemical Society, vol. 91-2, Abstract 195, pp. 284-287, Pheonix, Arizona (October 1991).

41. B. Mishra, D. L. Olson, J. J. Moore, and W. A. Averill, "Production of Oxygen by Electro-Reduction of Lunar Ores", Vol. 1, pp. 666-677, Proc. Conf. Space 92, Amer. Soc. of Civil Eng., N.Y., N.Y. (1992).

42. B. Mishra, D. L. Olson, S. Al-Hassan, and M. Salama, "Physical Characteristics of Iron Carbonate Scale Formation in Linepipe Steels", Corrosion 92, pp. 13/1-13/11, Nashville, TN, April, Houston, TX (1992).

43. P. Ferro, W. A. Averill, B. Mishra, D. L. Olson, and J.J. Moore, "Recovery of Calcium from the Effluent of Direct Oxide Reduction Process", "Processing of Residues and Effluents: Processing and Environmental Considerations", pp. 539-550, TMS Annual Meeting, San Diego, CA, TMS-AIME, Warrendale, PA, (1992).

44. A. Raraz, B. Mishra, D. L. Olson, J. J. Moore, and W.A. Averill, "Optimization of Process Efficiency in Cerium Electrorefining", Rare Earths: Resources, Science, Technology, and Application, Proc. of Annual Meeting, TMS-AIME, San Diego, CA, Warrendale, PA, pp. 337-350, (1992).

45. S. Pritchett, B. Mishra, J. J. Moore, D. L. Olson, and A. M. Murray, "Combustion Synthesis of Calcium and Lithium Gallides", Light Metals 1992, Annual TMS Meeting, pp. 1287-1294, San Diego, CA, Warrendale, PA (1992).

46. D. L. Olson, B. Mishra, and W. A. Averill, "Application of Molten Salts in Pyrochemical Processing of Reactive Metals", Proc. of 8th Intl. Symp. on Molten Salts, vol. 92-16, pp. 184-203, Electrochemical Society, St. Louis, MI, May 17-22 (1992).

47. B. Mishra, D. L. Olson, and W. A. Averill, "Processing of Effluent Salt from the Direct Oxide Reduction Process", Intl. Symp. on Waste Processing and Recycling in Mining and Metallurgical Industries, 31st Annual Conference of Metallurgists, Edmonton, Canada, pp. 279-291, August (1992).

48. B. Mishra, S. J. Al-Hassan, and D. L. Olson, "A Predictive Model for Corrosion of Linepipe Steels in CO2-Brine Solution", Proc. 3rd National Congress on Corrosion, Bombay, December 10-11 (1992).

49. B. Mishra, S. Al-Hassan, D. L. Olson, and M. M. Salama, "Prediction of Microstructural Effects on Corrosion Linepipe Steels in CO2-Brine Solution", Corrosion 93, NACE Annual Conference, pp. 90/1-90/13, New Orleans, LA, April (1993).

50. A. Wahid, D. L. Olson, D. K. Matlock, and C. E. Cross, "Corrosion of Weldments", ASM Handbook, 10th Edition, Vol. 6, pp. 1065-1069, ASM, Materials Park, OH (l993).

51. P. D. Ferro, B. Mishra, D. L. Olson, and W.A. Averill, "Process Optimization for Electrowinning of Calcium", Light Metals 1993, pp. 1129-1136, TMS-AIME, Warrendale, PA (1993).

52. B. Mishra, D. L. Olson, and W.A. Averill, "Applications of Molten Salts in Reactive Metals Processing", Proc. Intl. Conf. on Emerging Technologies for Metals and Fuels, pp. 317-328, Engineering Foundation, N.Y., N.Y., March 12-18 AIME-TMS, Warrendale, PA (1993); I.E.T., vol. 93 (3), pp. 66 (May-June 1993); RFP-4651; NTIS; GPO Dept. Order Number DE93003368.

53. D. L. Olson, "ERC Materials Lead Industry", Envirosciences, (12), pp. 22 (1992).

54. J. J. Moore and D. L. Olson, Design Education in Metallurgy and Materials Engineering, edited by M. E. Schesinger and D. E. Mikkola, "Undergraduate Materials Design at Colorado School of Mines", TMS-AIME, Denver, CO, February (1993), pp. 181-189, TMS Publ., Warrendale, PA (1993).

55. B. Mishra and D. L. Olson, "Synthesis of Al-Cu-Be Alloy by Molten Salt Electrolysis", TMS Fall Meeting, 1993, Pittsburgh, PA, Processing and Fabrication of Advanced Materials III, pp. 239-256, TMS, Warrendale, PA (1994).

56. S. Govindarajan, K. Monroe, J. J. Moore, B. Mishra, D. L. Olson, and J. Disam, "The Application of Combustion Synthesis in the Production of MoSi2 and of MoSi2, Proceedings, TMS (1993), Processing and Fabrication of Advanced Materials III, pp. 161-180, TMS, Warrendale, PA (1994).

57. B. Mishra, D. L. Olson, and M. M. Salama, "Prediction of Microstructural Effects on Corrosion of Linepipe Steels in C02-Brine Solution, Oil and Gas Symposium, Proc. 12th Intl. Congress on Metallic Corrosion, vol. 4, pp. 2840-2853, NACE, Houston, TX (1993).

58. S. Al-Hassan, B. Mishra, and D. L. Olson, "Prediction of Microstructural Effect on Corrosion of Linepipe Steels in CO2-Brine Solution", Corrosion 93, pp. 90/1-90/13, NACE, Houston, TX (1993).

59. B. Mishra, D. L. Olson, and W. A. Averill, "Electrolytic Recovery of Calcium from Molten Ca0-CaCl2 Salt-Mix", Proc. Intl. Sympo. on Environmental Aspects of Electrochemistry and Photoelectrochemistry, Ed. M. Tomiewicz et al., Electrochemical Society, pp. 191-202, Pennington, NJ (1993)

60. D. L. Olson and B. Mishra, "Electrolytic Extraction of Beryllium, Mineral Processing and Extractive Metallurgy Review, 13, pp. 127-143 (1994).

61. R. G. Wendt, W. C. Moshier, B. Shaw, P. Miller, and D. L. Olson, "Corrosion Resistant Aluminum Matrix for Graphite-Aluminum Composites", Corrosion 50 (11), pp. 819-836, (1994).

62. S. Govindarajan, J.J. Moore, B. Mishra, and D. L. Olson, "Development of High Temperature Oxidation Resistant Coating System for Molybdenum", in Elevated Temperature Coatings: Science and Technology I, pp. 291-302, Eds. N.B. Nahotre, J.M. Hampikian, and J.J. Stiglich, Presdient at TMS Fall Meeting, Rosemont Illinois, October, 1994.

63. S. Al-Hassan, B. Mishra, D. L. Olson, and M. M. Salama, "Effect of Heat Treatment on the Corrosion Resistance of Linepipe Steels in CO2 Atmosphere", Corrosion in Pipeline System, Proceedings of 2nd NACE ASIAN Conf., vol. 1, pp. 1061-1 to 1061-14, Singapore, September 26-30, 1994, NACE Publ., Houston, TX (1994).

64. B. Mishra, D. L. Olson, and P. D. Ferro, "Application of Ceramic Membranes in Molten Salt Processing of Radioactive Wastes", Int. Symposium on Actinides Processing: Methods and Materials, 1994, TMS Annual Meeting, San Francisco, CA, February 27-March 3, 1994, pp. 233-248, TMS-AIME, Warrendale, PA (1994).

65. B. Mishra, P. D. Ferro, and D. L. Olson, "Diffusion Coefficient of Oxygen in Molten Calcium Chloride", Proceedings of 9th Int. Symposium on Molten Salts, Ed. C.L. Hussey et al., 185th Annual Electrochem. Soc., pp. 697-704, San Francisco, CA, May 22-26, 1994, Electrochem. Soc., Pennington, N.J. (1994).

66. B. Mishra, D. L. Olson, and W. A. Averill, Pyrochemical Treatment of Radioactively Contaminated Waste Salts", Proc. of Intl. Symp. on Resource Conservation and Environmental Technologies in Metallurgical Industries, Ed. P. Mahant, C. Pickles, and W.K. Lu, pp. 143-156, Canadian Inst. of Metals, Montreal, Quebec (1994).

67. S. Govindarajan, K. Monroe, J. J. Moore, B. Mishra, and D. L. Olson, "Combustion Synthesis of MoSi2 and MoSi2 Composites", Proc. of Symp. on High Temperature Silicides and Refractory Alloys", ed. by C.I. Briant et al., MRS Publication, vol. 322, Boston, MA, pp. 113-118 (1993).

68. B. Mishra, D. L. Olson, and J. J. Moore, "Pyrochemical Processing of Waste Salt", 2nd Intl. Symp. on Metallurgical Processes for the Early 21 Century, vol. 1, Basic Principles, H.Y. Sohn, editor, pp. 563-582, 1994 TMS Publication, Warrendale, PA.

69. B. Mishra, D. L. Olson, and J. J. Moore, "Molten Salt Processing of Radioactive Waste", Proc. Symposium on "New Remediation Technology in the Changing Environemtal Arena", Chapter 26, pp. 185-190, Annual SME Meeting, Denver, CO, March (1995).

70. P. D. Ferro, B. Mishra, D. L. Olson, and W. A. Averill, "Application of Ceramic Membrane in Molten Salt Electrolysis of Ca0-CaCl2", J. of Waste Management vol. 7, (7), pp. 451-461, (1997).

71. B. Mishra, D.L. Olson, and J. J. Moore, "Remediation of Radioactive Contaminated Salt Waste by Pyrometallurgical Processing", Pyrometallurgy 95, Ed. by A.E. Wraith, pp. 23-34, Inst. Mining & Metallurgy, Cambridge, U.K. (1995).

72. S. Govindarajan, K. Monroe, J. J. Moore, B. Mishra, and D. L. Olson, "Oxidation Resistant Coatings for High Temperature Application of Molybdenum", Proc. of Forum on New Materials, Florence, Italy, June 29-July 4 (1994), Advances in Inorganic Films and Coatings, Advances in Science & Technology, vol. 5, Ed. by P. Vincenzini, pp. 345-352, Techna SRL, Florence, Italy (1995).

73. B. Mishra, W. A. Averill, and D. L. Olson, "Role of Chromium in Oxygen Sparging of Contaminated Molten Salts", 9th Intl. Symposium on Molten Salts, Ed. C. L. Hussey et al., 185 Electrochem. Soc., pp. 689-696, Pennington, N.J. (1994).

74. B. Mishra, A. Raraz, D. L. Olson, and W. A. Averill, "Optimization of Plutonium Electrorefining Through Modeling and Model Materials", Trace and Reactive Metals: Processing and Technology, pp. 153-171, (1995); also in Light Metals 1995, pp. 1321-1329, TMS, Warrendale, PA (1995).

75. C. Lensing, D.L. Olson, B. Mishra, and J. E. Selle, "Evaluation of Erbia as Molten Plutonium Containment Material", Light Metals 1996, pp. 1203-1209, TMS, Warrendale, PA (1996).

76. B. Mishra, A. G. Raraz, D. L. Olson, and W. A. Averill, "Formation of Explosive Compounds in Acid-Contaminated Leaded Rubber Gloves, Part I: Theoretical Analysis", J. of Hazardous Materials, 56, pp. 107-116 (1997).

77. B. Mishra, A. G. Raraz, D. L. Olson, and W. A. Averill, "Formation of Explosive Compounds in Acid Contaminated Leaded Rubber Gloves, Part II: Experimental Verification" J. of Hazardous Materials, 57, pp. 13-28 (1998).

78. B. Mishra, S. Al-Hassan, D. L. Olson, and M. M. Salama, "Development of a Predictive Model for Corrosion of Steel in CO2 Containing Solutions", Corrosion 53 (11), pp. 852-859 (1997).

79. C. Lensing, D. L. Olson, and B. Mishra, "Kinetics of Erbium Oxide Corrosion in Molten Cericum", Light Metals 1997, pp. 1179-86, TMS, Warrendale, PA (1997).

80. P. D. Ferro, B. Mishra, D. L. Olson, and W.A. Averill, "Electrolytic Extraction of Calcium from Calcium Oxide", Golden Jubilee Issue, Trans. Indian Institute of Metals, vol. 51 (1), pp. 69-77 (1998).

81. D. L. Olson and B. Mishra, "Review of Liquid Lithium Corrosion of Ferrous Containment Materials", Light Metals 1998, pp. 1303-1308, TMS, Warrendale, PA (1998).

82. S. Al-Hassan, B. Mishra, D. L. Olson, and M. M. Salama, "Effect of Microstructure on Corrosion of Steels in Aqueous Solutions Containing Carbon Dioxide", Corrosion, vol. 54 (6), pp. 480-491 (1998).

83. B. Mishra, D. L. Olson, and C. S. Eberle, "Corrosion of Non-Ferrous Materials in Liquid Lithium and Lithium Chloride", Light Metals 1998, pp. 1349-1358, TMS, Warrendale, PA (1998).

84. B. Mishra, D. L. Olson, and C. Lensing, "The Influence of Weld Microstructural Features on Corrosion Behavior", Proc. of the 3rd Pacific Rim Conf. on Adv. Mat. and Proc. (PRICM), pp. 2303-2309, July, 1998, Honolulu, Hawaii, TMS, Warrendale, PA (1998).

85. B. Mishra, D. L. Olson, and A. Raraz, "Modeling Studies in Molten Salt Electrorefining of Plutonium", Proc. 1999 TMS Annual Meeting, San Diego, CA, March 1-4 (1999).

86. B. Mishra and D.L. Olson, "Review of Beryllium Metallurgy", Proc. Symp. on Review of Extraction, Processes and Applications of Reactive Metals, 1999 TMS Annual Meeting, San Diego, CA, March 1-4 (1999), submitted to Metallurgy of Reactive Metals (2000).

87. B. Mishra and D. L. Olson, "Corrosion of Refractory Alloys in Molten Lithium and Lithium Chloride",
Min. Proc. Ext. Met. Rev., vol. 22, pp. 369-388 (2001). F. E. Gibbs, C. J. Freiboth, J. D. Olivas, D. L. Olson, and T. G. Zocco, "Mold Design Parameters for Cast Alpha-Phase Plutonium", to be submitted to Defense Research Review (2000).

88. F. E. Gibbs, D. L. Olson, and W. Hutchinson, "Identification of a Homogenization Surrogate for the Plutonium 1 wt. pct. Gallium Alloy: Part I, to be submitted to Met. and Mat. Trans. (2000).

89. F. E. Gibbs, D. L. Olson, and W. Hutchinson, "Determination of the Activation Energy for Diffusion in a Cerium-5 wt. pct. Lanthanum Alloy: Part II, to be submitted to Met. and Mat. Trans. (2000).

90. F. E. Gibbs, D. L. Olson, and W. Hutchinson, "Determination of the Activation Energy for Diffusion in a Cerium-5 wt. pct. Lanthanum Alloy: Part II, to be submitted to Met. and Mat. Trans. (2000).

91. R. J. Erfurdt, D. L. Olson, and F. E. Gibbs, "An Investigation of the Effect of Iron Content on the Homogenization Response of Plutonium-1 wt. pct. Gallium Alloy", to be submitted (2000).

92. F. E. Gibbs, W. H. Hutchinson, and D. L. Olson, "Identification of a Physical Metallurgy Surrogate for the Plutonium-1 wt. pct. Gallium Alloy", Conf. Proc. on Plutonium Futures - The Science, Topical Conference on Plutonium and Actinides, American Institute of Physics, AIP Conf., Proc. #532, Santa Fe, NM, pp. 109-101, July 10-13 (2000).

93. D. E. Dooley, D. L. Olson, and G. R. Edwards, "Prediction of Plutonium Alloy Phase Stability Using Electronic Properties", Conf. Proc. on Plutonium Futures - The Science, Topical Conference on Plutonium and Actinides, American Institute of Physics, AIP Conf. Proc. #532, Santa Fe, NM, pp. 424-425, July 10-13 (2000), AIP, Melville, NY (2000).

94. D. L. Olson, M. Marya, D. W. Wenman, J. D. Olivas, and D. Eliezer, "The Use of Alloying Theory to Enhance the Properties of Magnesium", Proc. of THERMEC '2000, Proceeding of the International Conference on Processing and Manufacturing of Advanced Materials, Las Vegas, NV, Dec 2000: CDROM Section A1, vol. 117/3, Special Issue : J. of Mat. Proc. Techn. , 6 pages, Elsevier Science, UK (October 2001).

95. D. L. Olson, D. W. Wenman, V. I. Kaydanov, C. Suryanarayana and D. Eliezer, "The Search for Room Temperature Cubic Magnesium Alloys", Proc. of Magnesium 2000, 2nd Israeli Int. Conf., pp. 165-172, February 22-24, 2000, Dead Sea, Israel, Magnesium Research Institute, Ltd., Posash House, Beer Sheva, Israel (2000).

96. D. Dooley, B. Martinez, D. Olson, D. Olivas, R. Rouquille, and T. Rising, "Diffusion of Helium in Plutonium Alloys", Plutonium Futures - Sciences, Topical Conference of Plutonium and Actinides, American Institute of Physics, AIP Conf. Proc. #532, Santa Fe, NM, pp. 428-430, July 10-13 (2000), AIP, Melville, NY (2000).

97. D. E. Dooley, D. L. Olson, G. R. Edwards, and F. E. Gibbs, "Development of an Electronic Phase Diagram and the Predictions of Plutonium Alloy Phase Stability Using Electronic Properties", J. Phys. Condens. Matter, 13, pp. 8677-8696 (2001).

98. B. Mishra and D. L. Olson, "Production of Reactive Metals by Molten Salt Processing", Proc. of the 201 Electrochemical Society Meeting, Philadelphia, PA., 12 pages, May 12-17, (2002).

99. D.L. Olson, Warren I. Finch and B. Mishra, Critical Review of the new Book entitled "Uranium Resource Processing: Secondary Resources", by C.K. Gupta and H. Singh which was published by Elsevere Publishing. the Critical Review was published in the American Association of Petroleum Geologists Bulletin, vol. 88 (8), pp 1208-11, February (2004).

100. Ge Wang, Sittha Saidaraasamoot, David L. Olson, Brajendra Mishra, John S. Spencer, and Swieng Thuanboon, Tanker Corrosion", in Handbook of Environmental Degradation of Materials, edit. By Myer Kutz, pp. 523-545. William Andrew Publishing, NY (2005).

101. Y. D. Park, D. L. Olson, A. Landau and M. Pinkas, "Assessment of Hydrogen Cracking in UNS N05500 Using TEP and XRD Analysis", Corrosion 2004., paper 04265, pp 1-7, (2004).

102. B. Mishra and D. L. Olson, "Molten Salt Applications in Materials Processing", J. Physics and Chemistry of Solids, Vol. 66, (2-4) February-April, pp 396-401 (2005).

103. F. J. Sanchez, B Mishra and D. L. Olson, "Magnetization Effect on Hydrogen Absorption in High-strength Steels and its Implications", Scripta Materialia, vol. 53, (12) pp 1443-1448 (2005).

104. D. L. Olson and B. Mishra, Re port on Findings on MMS Offshore Coating Workshop", in Advanced Coating R & D for Pipelines and Related Facilities, pp. 16-28, NIST Special Publication 1044, NIST, Gaithersburg, MD, (2005).

105. Sweing Thuanboon, David S. Tordonato, William Navidi, David L. Olson, Brajendra Mishra and Ge Wang, " A Statistical Analysis of Corrosion Wastage or Transverse Members in Single Hull Tankers", Proc. Of OMAE 2006, @5th Intl.. Conf.. on Offshore Mechanics and Arctic Engineering, 4-9, June 2006, Hamburg Germany, Paper OMAE2006-92665, pp. 1-7, June (2006).

106. Y.D. Park, D.L. Olson, A. Landau, and M. Pinkas, " Assessment of Hydrogen-Induced Precipitation in a Nickel-Copper Alloy using Thermoelectric Power", Corrosion Vol. 62,(5) , p. 395-402 (2006).

107. J. E. Jackson, A. N. Lasseigne-Jackson, F. J. Sanchez, D. L. Olson and B. Mishra, " The Influence of Magnetization on Corrosion in Pipeline Steels", Paper #IPC2006-10615, Proc. of IPC 2006, 6th International Pipeline Conference, pp., Calgary, Alberta, Canada, Sept. 25-29, 2006, ASME, NY, NY (2006).

108. J. E. Jackson, D. L. Olson, A. N. Lasseigne-Jackson, B. Mishra and T. A. Siewert, " Correlating the Influence of Magnetic Field on Solute Content in Metals Using the Thermodynamic Auxiliary Work Functions", Proc. of the 16th Symposium on Thermophysical Properties, pp. 1-9, July 30-August 4, 2006, Boulder Colorado (2006).

109. J. Sanchez, B. Mishra and D. L. Olson, "An Assessment of Magnetization Effect pm hydrogen Induced
Cracking for Thick Walled Pipelines and Its Implications", Script Mat. (2008).

110. D. P. Johnson, R. K. Schulze, R. J. Hanrahan, D. L. Olson and B. Mishra, "Early Stage Actinide Oxide
Development: Kinetics Expressions and Mechanism", Plutonium Futures, (2008).

 

Publications: Welding and Joining

1. D. L. Olson and K. M. Koliwad, "Large Silicon Slice Mounting", IEEE Transactions on Parts, Hybrids, and Packaging PHP 7, 76 80 (1971).

2. D. L. Olson, "Strike the Arc", Mines Magazine 63, 6 10 (1973).

3. A. L. Liby and D. L. Olson, "Metallurgy of Electroslag Welding: The State of the Art", Colorado School of Mines Quarterly 69 (1) 41 73 (1974).

4. K. P. Ferrera and D. L. Olson, "Mn0 Si02 Ca0 Welding Flux System", Welding Journal 54 (7), 211s 215s (1975).

5. M. O'Brien, C. R. Rice, and D. L. Olson, "High Strength Diffusion Welding of Silver Coated Base Metals", Welding Journal 55 (1), 25 27 (1976).

6. V. K. Grotzky, C. R. Rice, J. H. Doyle, and D. L. Olson, "The Nature of Mercury Activated Silver Solid State Bonds", Rockwell International, Rocky Flats Report RFP 2514 pp. 13, (November 19, 1976).

7. A. M. Davila, D. L. Olson, and T. A. Freese, "Submerged Arc Welding of Ductile Iron", AFS Trans. 85, 79 86 (1977).

8. A. M. Davila and D. L. Olson, "The Development of Austenitic Filler Materials for Welding Ductile Iron", Proc. Inter. Conf., "Trends in Steel and Consumables for Welding", London, 493 508 (1978).

9. D. D. Schwemmer, H. E. Janzen, and D. L. Olson, "The Role of Specific Ionic Additions on the Behavior of Manganese Silicate Welding Fluxes," Proceedings Inter. Conf., "Trends in Steels and Consumables for Welding", Welding Institute, London, 265 280 (1978).

10. J. W. Elmer, P.A. Steinmeyer, and D. L. Olson, Final Report, "Microstructure of Specific Stainless Steel Weldments Being Evaluated for Cryogenic Science", National Bureau of Standards Report NBSIR 79 1609, 353 400 (June 1979).

11. J. R. Roper and D. L. Olson, "The Influence of Capillarity on the Welding of 21 6 9 Stainless Steel", Welding Journal 57, 103S 107S (1978).

12. D. D. Schwemmer, D. L. Olson, and D. Williamson, "The Relationship of Welds Penetration to the Welding Flux", Welding Journal 58 (5), 153s 160s (1979).

13. D. L. Olson and A. L. Liby, "Diffusion Bonding", Beryllium Science and Tech., 2, Chapter 14, 275 295, Plenum Press, New York, NY, (1979).

14. D. L. Olson, D. D. Schwemmer, and D. L. Williamson, "Discussion on the Relationship of Weld Penetration to the Welding Flux", Welding Journal 59 (1), 31S 36S (1980).

15. A. M. Davila and D. L. Olson, "Welding Consumable Research for Ductile Iron", Metal Casting, 70, (11), 70 73 (1980).

16. J. E. Jones, D. L. Olson, and G. P. Martins, "Metallurgical and Thermal Aspects of Non Vertical Electroslag Welding", Welding Journal 59 (9), 245S 252S (1980).

17. T. L. Reinhart, E. Carmona, and D. L. Olson, "The Influence of Ionic Character on Welding Flux Behavior", Intern. Conf. Book on Welding Research in the 1980's B, 107 112, JWRI, Osaka, Japan (October 1980).

18. D.L. Olson and A. L. Liby, "Joining III: Diffusion Bonding", New Silver Technology, The Silver Institute, Washington, D.C., (July 1981).

19. A. L. Liby, G. P. Martins, and D. L. Olson, "Simulation of Unsteady State Heat Flow in Vertical Electroslag Welding", published in AIME Conf. Book on "Heat Flow in Castings and Weldments, Engineering Foundation Conference on "Modeling of Casting and Welding Processes", Franklin Pierce College, Rindge, New Hampshire (August 3 8, 1980), pp. 162 195, TMS, Warrendale, PA (1981).

20. D. L. Olson and J. E. Indacochea, "The Physical and Chemical Behavior of Submerged Arc Welding Fluxes", Proceedings of Australia New Zealand Welding Convention, 307 321, 12 16, October (1981), Christchurch, New Zealand.

21. K. Olsen, D. L. Olson, and N. Christensen, "Weld Bead Tempering of the Heat Affected Zone", Scandinavian Journal of Metallurgy 11, 163 168 (1982).

22. J. W. Elmer, D. L. Olson, and D. K. Matlock, "Thermal Expansion Characteristics of Austenitic Stainless Steel Filler Metals", Welding Journal 61 (9), 293S 301S (1982).

23. G. M. Campbell, J. W. Elmer, W. S. Gibbs, D. K. Matlock, and D. L.Olson, "Evaluation of Factors Controlling High Temperature Service Life of 2 1/4 Cr 1 Mo Steel to Austenitic Stainless Steel Weldments", Conference Proceedings, ASM Conference "Trends in Welding Research in the United States", New Orleans, La., pp. 443 470, Materials Park, Ohio, Nov. (1981).

24. S. Liu, K.C., C. B. Dallam, and D. L. Olson, "Performance of the CaF2 Ca0 Si02 System as a Submerged Arc Welding Flux for a Niobium Based HSLA Steel", Conference Proceedings, International Conference on "Welding Technology for Energy Applications", CONF 820544, pp. 445 466, Gatlinburg, Tennessee, May 16 19 (1982).

25. D. K. Matlock, G. R. Edwards, D. L. Olson, and S. Ibarra, "An Evaluation of the Fatigue Behavior in Surface, Habitat, and Underwater Wet Welds" Conference Proceedings "Second International Conference on Offshore Welded Structures", London, England, PP. P15 1 to P15 10, November 16 18, (1982); also in IIW Proceeding Underwater Welding Conference, Chapter III, paper 9, page 303, Pergamon Press, Oxford (Conf. 27 28 June 1983, Trondheim, Norway) 1983.

26. D. D. Schwemmer and D. L.Olson, Technical Note: "A Novel Way to Cut Chromium Containing Alloys" Welding Design and Fabrication 55 (10), pg. 26, (1982).

27. C. E. Cross and D. L. Olson, "Modification of Eutectic Fusion Zone Microstructure", Welding Journal 61 (12), pp. 381s 387s, (1982).

28. S. J. Mathews, J. K. King, D. G. Howden, and D. L. Olson, "Dissimilar Metals Welding", AWS Handbook 4, Seventh Edition, Chapter 12, pp. 513 547, (1982).

29. G. R. Edwards, D.L. Olson, and D.K. Matlock, "Titanium Welding Metallurgy: Cracking Susceptibility", Proceedings of Ti 6211 Basic Research Program, ONR Report: DTNSRDC SME CR 15 82, pp. 345 362, July (1982).

30. M. S. Misra, D. L. Olson, and G. R. Edwards, "The Influence of Process Parameters and Specific Additions on Epitaxial Growth in Multiple Pass Ti 6Al 4V Welds", AIME Proceedings on the Symposium "Grain Refinement in Castings and Welds", St. Louis (Oct. 25 26, 1982) pp. 259 274, AIME, Warrendale, PA, (1983).

31. R. K. Okagawa, R. D. Dixon, and D. L. Olson, "The Influence of Nitrogen from Welding on Stainless Steel Weld Metal Microstructure", Welding Journal 62 (8), 204s 209s, (1983).

32. C. E. Cross, A. Salvetat, J. F. Capes, D. L. Olson, and D. K. Matlock, "Morphology of Al Cu Eutectic Fusion Zone Microstructure", IMS ASM International Metallographic Exhibit (1982), (Class 2 3rd place Award); Metallography 16, 112, Feb. (1983).

33. D. L. Olson, R. L. Hellner, L. E. Myers, R. J. Dybas, L. E. Shoemaker, and T. A. Siewert, "Arc Welding of Cast Iron", ASM Handbook on Welding, V. 6, 9th Edition, pp. 307 319, Materials Park, OH (1983).

34. D. L. Olson, R. L. Hellner, T. H. North, J. E. Sims, R. S. Sabo, E. Chaney, S. Liu, C. B. Dallam, and J. E. Jones, "Submerged Arc Welding", ASM Handbook on Welding, Vol. 6, 9th Edition, pp. 114 152 (1983).

35. C. R. Rice, T. F Diderickson, J. E. Snead, and D. L. Olson," Welding Metallurgy Considerations Involving the Welding of Steel Armor Plate onto SSR Cars at Rocky Flats", Rockwell International, Rocky Flats Report RFP 3507, January 17 (1984).

36. R. H. Frost, D. L. Olson, and G.R. Edwards, "The Influence of Electrochemical Reactions on the Chemistry of the Electroslag Welding Process", 1983 Engineering Foundations Conference Proceedings, "Modeling of Castings and Welding Processes II, pp. 279 294, AIME, Warrendale, PA, (1983).

37. J. E. Indacochea and D. L. Olson, "Relationship of Weld Metal Microstructure and Penetration to Weld Metal Oxygen Content", J. Mat. Energy Systems, 5 (12), 139 148 (1983).

38. C. E. Cross, D. L. Olson, G. R. Edwards and J. F. Capes, "Weldability of Aluminum Lithium Alloys", Conference Proceeding on "Aluminum Lithium Alloy II", at Monterey, California, April 12 14, 1983, edited by T.H. Sanders, Jr., and E.A. Starke, Jr., AIME Publication, Warrendale, PA, pp. 675 682 (1984).

39. D. L. Olson, "Welding Research in U.S. Universities and its Relationship to Government and Industrial Funding", to be presented and published IIW Conf. Proc. for Int. Congress on Welding Research, Boston, pp. 144 151, July (1984).

40. J. A. Self, D. L. Olson, and G. R. Edwards", Stability of Austenitic Weld Metal", the Proceedings of the International Cryogenic Materials Conference (ICMC), Kiev, USSR (June 24 26, 1984), pp. 185 188 (in Russian), (1986); Conf. Book "Cryogenic Properties of Metals", pp. 181 189, (in English), NBS Publication, Boulder, Colorado (1987).

41. J. A. Self, D. K. Matlock and D. L. Olson, "An Evaluation of Austenitic Fe Mn Ni Weld Metal for Dissimilar Metal Welding", Welding Journal 63, 282s 288s (1984).

42. J. E. Indacochea, M. Blander, N. Christensen, and D. L. Olson, "Chemical Reactions with Fe0 Mn0 Si02 Fluxes", Met. Trans. 16B, 237 245 (1985).

43. M. Blander, and D.L. Olson, "Thermodynamic and Kinetic Factors in the Pyrochemistry of Submerged Arc Flux Welding of Iron Based Alloys", AIME Conf. Proc. of the Second International Symposium on Slags and Fluxes, Lake Tahoe, Reno, Nevada, November 11 14 (1984), pp. 271 277, AIME Warrendale, PA (1984).

44. R. David Thomas and D. L. Olson, Supplement to "Welding Research in the Western Hemisphere", American Welding Technology Application Center, IIW Doc. No. VII 29 84, September (1984).

45. C. B. Dallam, S. Liu, and D. L. Olson, "Flux Composition Dependence of Microstructure and Toughness of Submerged Arc HSLA Weldments", Welding Journal 64 (5), 140s 151s (1985).

46. W. S. Gibbs, S.H. Wang, D. K. Matlock and D. L. Olson, "High Temperature Impression Creep Testing of Weldments", Welding Journal, 64 (6), 152s 158s (1985).

47. D. L. Olson, "Prediction of Austenitic Weld Metal Microstructure and Properties", Adams Lecture AWS Meeting, Dallas, TX, April (1984), Welding Journal 64, 281s 295s (1985).

48. J. A. Self, S. A. Abdulgader, and D. L. Olson, "The Fe Ni Mn Cu C Filler Metal System for Welding Ductile Cast Iron", Welding Journal 64 (11), 322s 326s, (1985).

49. J. E. Jones and D. L. Olson, "Selecting Arc Welding Processes", Chemical Engineering 93, Part 1: (5), pp. 117 121 (March 3, 1986), and Part 2: (6) pp. 131 134 (March 31, 1986).

50. O. Grong, D. L. Olson and N. Christensen, "Carbon Oxidation in Hyperbaric MMA Welding", Metal Construction 17, pp. 810R 814R, (Dec. 1985).

51. C. A. Natalie, D. L. Olson and M. Blander, "Behavior of Welding Fluxes", Annual Review of Materials Science 16, 389 413 (1986).

52. P. Dunn, C.A. Natalie and D. L. Olson", Sol Gel Fluxes for Flux Cored Arc Welding Consumables", Conf. Book: Welding Research The State of the Art", ASM International, Materials Park, Ohio, pp. 171 186, (1986).

53. T. Diebold, G. R. Edwards, and D. L. Olson, "Discussion of Fundamental Aspects of Formation and Stability of Explosive Welds", Met. Trans. 17A, 374, (1986).

54. S. Liu and D. L. Olson, "The Role of Inclusions in Controlling HSLA Steel Weld Metal Microstructures", Welding Journal 65(6), 139s 149s (1986).

55. R. H. Frost, J. E. Jones and D. L. Olson, "Electroslag Welding of Pressure Vessel Steels", ONR Conf. Book, U.S. Naval Academy, Division of Engineering and Weapons, Report EW 20 85, "Electroslag Processing for Marine Applications", Annapolis, MD, 4 5 March (1985).

56. D. K. Matlock, G. R. Edwards D. L. Olson, S. Ibarra, "Effect of Seawater on the Fatigue Crack Propagation Characteristics of Welds for Offshore Structures", Conf. Book on "Fatigue, Corrosion Cracking, Fracture Mechanisms and Failure Analysis", Salt Lake, UT, Dec. 2 6, (1985), pp. 113 122, ASM, Metals Park, Ohio (1986).

57. C. E. Cross, J. F. Capes, and D. L. Olson, "Characterization of Binary Aluminum Alloy Weld Metal Microstructures", Microstructural Science 14, "Welding Failure Analysis and Metallography", pp. 3 16, ASM, Materials Park, OH (1987).

58. B. F. Carpenter, D. K. Matlock, and D. L. Olson, "Microstructural Characterization of Aluminum Passivated Stainless Steel Weldments", Microstructural Science 14, "Welding, Failure Analysis and Metallography", pp. 137 158, ASM, Materials Park, OH (1987).

59. D. L. Olson and S. Ibarra, "Underwater Welding Metallurgy, Proceedings ASME, "First OMAE Specialty Symposium on Offshore and Arctic Frontiers", ASME, New York, N.Y., pp 439 447, (1986).

60. J. A. Self, B.F. Carpenter, D. L. Olson and D. K. Matlock, "Phase Transformations and Alloy Stability in Fe Mn Ni Cr Al Weld Metal", Conf. Proc. "Alternate Alloying for Environmental Resistance", pp. 37 45, TMS-AIME, Warrenville, PA (1987).

61. S. Liu, D. K. Matlock and D. L. Olson, "A Thermodynamic and Kinetics Approach in the Development of Expressions for Alloy Behavior Prediction", J. Heat Treating 4 (4), pp. 309 316 (1986).

62. O. Grong, T. A. Siewert, G. P. Martins and D. L. Olson, "A Model for the Silicon Manganese Deoxidation of Steel Weld Metals", Met. Trans. 17A (10), 1797 1807 (1986).

63. D. Hayduk, B. K. Damkroger, G. R. Edwards and D. L. Olson, "Cracking Susceptibility of Ti 6Al 2Nb 1Ta 0.8Mo as Determined by the Varestraint Test", Welding Journal 65, 251s 260s (1986).

64. M. Blander and D. L. Olson, "Electrochemical Effects on Weld Pool Chemistry in Submerged Arc and D.C. Electroslag Welding", Proc. Int. Conf. on "Trends in Welding Research", Gatlinburg, TN, May 19 22 (1986), pp. 363 366, ASM, Materials Park, Ohio (1986).

65. R. A. Nichting, G. R. Edwards, D. L. Olson and B. B. Rath, "Theories of Low Temperature Solid State Bonding", Proc. Int. Conf. on Trends in Welding Research, Gatlinburg, TN, May 19 22 (1986), pp. 733 738, ASM, Materials Park, Ohio (1986).

66. C. E. Cross and D. L. Olson, "Hot Tearing Model to Assess Aluminum Weldability", Proc. Int. Conf. on "Aluminum Alloys: Physical and Mechanical Properties", Univ. of Virginia, Charlotteville, VA, July 15 20, (1986), vol. III, pp. 1869 1875 (1986).

67. C. E. Cross and D. L. Olson, "Weld Metal Solidification and Hot Tearing of Aluminum Alloys", Solidification Seminar, Centennial Technical Symposia, ALCOA Laboratories, p. 46, August 24 28 (1986).

68. P. S. Dunn, C. A. Natalie and D. L. Olson, "Sol Gel Fluxes for Flux Cored Welding Consumables", J. Mat. Energy Systems 8 (2), 176 184 (1986).

69. D. L. Olson and T. A. Siewert, "The International Research Supplement", Welding Journal 65 (10), 8 (1986).

70. A. C. Hunt, G. R. Edwards and D .L. Olson, "Developments in Controlling Phase Transformations in Microalloyed Steel Weld Metal", Proc. Int. Weld Conf. 2, pp. 1183 1199, January 12 14, 1987, New Delhi, India, Welding Research Institute, Tiruchivapalli, 620 014, India (1987).

71. S. Ibarra, C. E. Grubbs, and D. L. Olson, "The Nature of Metallurgical Reactions in Underwater Welding", 1987 Offshore Technology Conference, OTC Report 5388, pp. 277 282, (April 27, 1987).


72. D. K. Matlock, G. R. Edwards, D. L. Olson and S. Ibarra, "Effect of Sea Water on the Fatigue Crack Propagation Characteristics of Welds for Offshore Structures", J. Mat. Energy Systems 9, pp. 25 34, (1987).

73. M. C. Nordin, G. R. Edwards and D. L. Olson, "The Influence of Yttrium Microadditions on Titanium Weld Metal Cracking Susceptibility and Grain Morphology", Welding Journal 66 (11), 342s 351s, (1987).

74. J. H. Kim, R. H. Frost, D. L. Olson and M. Blander, "Electrochemical Reactions at the Electrode in Submerged Arc Welding", Proc. of "Joint International Symposium on Molten Salts", Honolulu, Hawaii, editors G. Mamantov et al, vol. 87 7, pp. 928 938, Electrochemical Society Inc., Pennington, N.J. (October 18 23, 1987).

75. S. Liu and D. L. Olson, "The Influence of Inclusion Chemical Composition on Weld Metal Microstructure", J. Mat. Eng. 9, 237 251 (1987).

76. C. E. Cross, G. R. Edwards, D. L. Olson and R.H. Frost, "Intrinsic Nucleation of Weld Metal Grains", Conf. Proceedings on Solidification Processes, pp. 388 391, Sheffield, U.K., September (1987), The Institute of Metals, London (1988).

77. C. E. Cross and D. L. Olson, "Compositional Factors Affecting Weldability of Extruded Aluminum Alloys", Conf. Proc. "4th Int. Alum. Extrusion Tech. Seminar", 2, pp. 391 393, Chicago, April 11 14 (1988).

78. He Yunija, R. H. Frost, G. R. Edwards and D. L. Olson, "Influence of Grain Refinement on the Weldability of Aluminum Alloys", Welding Journal 68 (7), 280s 289s (1989).

79. S. Ibarra, C. E. Grubbs, and D. L. Olson, "Metallurgical Aspects of Underwater Welding", J. Metals 40 (12), 8 10 (1988).

80. R. E. Francis, J.E. Jones and D. L. Olson, "Effect of Shield Gas Oxygen Activity on GMA Microalloyed HSLA Steel Weld Metal Microstructure", Welding Journal, 69 (11), 408s-415s (1990).

81. P.T. Oldland, C.W. Ramsay, D. K. Matlock, and D. L. Olson, "Significant Features of High Strength Steel Weld Metal Microstructures", Welding Journal 68 (4), 158s 168s (1989), addition 68 (6), pp. 252s (1989).

82. M.J. Dvornak, R.H. Frost, and D. L. Olson, "The Weldability and Grain Refinement of Al 2.2 Li 2.7 Cu Alloy", Welding Journal 68 (8), 327s 335s (1989).

83. I. D. Choi, D. K. Matlock, and D. L. Olson, "The Influence of Composition Gradient on Tensile Properties of Weld Metal", Scripta Met. 22, 1563 1568 (1988).

84. T. A. Siewert, C. N. McCowan, and D. L. Olson, "Ferrite Number Prediction to 100 FN in Stainless Steel Weld Metal", Welding Journal 67 (12), 289s 298s (1988).

85. C. N. McCowan, T. A. Siewert and D. L. Olson, "Stainless Steel Weld Metal: Prediction of Ferrite Content", Welding Research Council Bulletin, #342 (April 1989).

86. C. D. Dallam and D. L. Olson, "Stress and Grain Size on Weld Metal Ferrite Formation", Welding Journal 68 (5), 198s 205s (1989).

87. C. A. Natalie, D. L. Olson, and M. Blander, "Weld Pool Pyrometallurgy", Materials Processing Theory and Practice 8 (Welding Theory and Practice), Chap. 5, pp. 149 174, North Holland Physics, Elsevier Science Publisher, NY, NY (1989).

88. S. Ibarra, D. L. Olson, and C. E. Grubbs, "Underwater Wet Welding of Higher Strength Offshore Steels", OTC Paper #5889, 21st Annual OTC, Houston, TX, May 1 4, pp. 67 76, (1989).

89. J. H. Kim, R. H. Frost, D. L. Olson, and M. Blander, "Effect of Electrochemical Reactions on Submerged Arc Weld Metal Compositions", Welding Journal 69 (12), 446s-453s (1990).

90. R. Trevisan, D. D. Schwemmer, and D. L. Olson, "The Fundamentals of Weld Metal Pore Formation", Materials Processing Theory and Practice 8 (Welding Theory and Practice), Chap. 3, pp. 79 116, North Holland Physics, Elsevier Science Publishers, NY, NY (1989).

91. D. D. Kautz, D. L. Olson, P. Burgardt, and G. R. Edwards, "A Characterization of Pulsed Electron Beam Welding Parameters", Welding Journal, 70 (4), 100s-105s (1991).

92. D. E. Bunnell D. L. Olson, and S. Liu, "Moisture Determination of SMAW Electrode Coverings Using Electrical Capacitance", J. Mat. Engr., 12 (2), 159 165 (1990).

93. C. W. Ramsay, D. L. Olson, and D. K. Matlock, "The Influence of Inclusions on the Microstructures and Properties of a High Strength Steel Weld Metal", Proc. Gatlinburg International Conference on "Recent Trends in Welding Research", May 14 18, 1989, pp. 763 768, Metals Park, Ohio (1990).

94. D. L. Olson, "The Fundamentals of Welding Consumables", Proc. Gatlinburg International Conference on "Recent Trends in Welding Research", May 14 18, 1989, pp. 553 562, ASM, Materials Park, Ohio (1990).

95. N. H. Nicholas, R. A. Nichting, G.R. Edwards, and D.L. Olson, "The Influence of Surface Topography on Low Temperature Solid State Bonding", Proc. Gatlinburg International Conference on "Recent Trends in Welding Research", May 14 18, 1989, pp. 547 550, ASM Metals Park, Ohio (1990).

96. I. D. Choi, D.K. Matlock, and D. L. Olson, "Influence of Composition Gradients on Weld Metal Creep Behavior: An Analysis Based on Laminate Composites", Proc. Gatlinburg International Conference on "Recent Trends in Welding Research", May 14 18, 1989, pp. 787 792, ASM, Metals Park, Ohio, (1990).

97. S. K. Marya and D. L. Olson, "Effect of Minor Elements and Process Parameters on GTA Weld Bead Variances in Steels", Revue de Me'tallurgie, Memoires et Etudes Scientifiques, vol. 86 (1), pp. 25 34 (1989).

98. P.A. Burke, J. E. Indacochea, and D. L. Olson, "The Effects of Welding Flux Additions on 4340 Steel Weld Metal Composition", Welding Journal 69 (3), 115s 122s (1990).

99. S. Liu and D. L. Olson, "A New Approach to Welding Engineer Education", Welding Journal, 69 (3), 38 40 (1990).

100. I. D. Choi, D. K. Matlock, and D. L. Olson, "An Analysis of Diffusion Porosity in Copper Nickel Composite", Mat. Sci. and Eng. A124, 1L5 1L8 (1990).

101. I. D. Choi, D. K. Matlock, and D. L. Olson, "Creep Behavior of Nickel Copper Laminate Composites with Controlled Composition Gradients", Met. Trans. 21A (9), 2513 2520 (1990).

102. I. D. Choi, D. K. Matlock, and D. L. Olson, "Communication: Creep Behavior of Nickel Copper Solid Solution Alloys Below 0.55 Tm", Met. Trans. 21A (9), 2601 2604 (1990).

103. AWS Roundtable Discussion, Transcribed Quotes (included D.L. Olson), "Needed Directions in Welding Research", by A. Cullison, H. Woodward, and B. Newton Montiel, Welding Journal 68 (5), 27 41 (1989).

104. D. W. Oh, D. L. Olson and R. H. Frost, "The Influence of Boron and Titanium on Low Carbon Microalloyed Steel Weld Metals", Welding Journal 69 (4), 151s 158s (1990).

105. S. Ibarra, D. L. Olson, and S. Liu, "Functional Forms of Equations to Predict Steel Weld Metal Properties", Proc. OMAE Conf., V.III Part B, 517 523, Houston, ASME, February (1990).

106. M. A. Lisin, I. D. Choi, D. K. Matlock, and D. L. Olson, "A Composite Modeling Analysis of Impression Creep Testing on Heterogeneous Materials", Welding Journal 69 (4), 159s 165s (1990).

107. S. Liu, D. L. Olson, G. P. Martins, and G. R. Edwards, "Modeling of Brazing Processes That Use Coatings and Interlayers", Welding Journal, 70 (8) 207s-215s (1991).

108. D. L. Olson and D. K. Matlock, "Compositional Gradient Effects on Weldment Properties", Proc. ASM "Weldability of Materials Symposium", Detroit, Michigan, October 6 12, pp. 49 56, ASM, Materials Park, OH, (1990).

109. M. S. Dvornak, R. H. Frost, and D. L. Olson, "Effects of Grain Refinement on Aluminum Weldability", Proc. ASM "Weldability of Materials Symposium", Detroit, Michigan, October 6 12, pp. 289 296, ASM, Materials Park, OH, (1990).

110. D. L. Olson, S. Liu, and G. R. Edwards, "Role of Solidification on HSLA Steel Weld Metal Chemistry", Proc. ASM "Weldability of Materials Symposium", Detroit, Michigan, October 6 12, pp. 183 190, ASM, Materials Park, OH, (1990).

111. D. L. Olson and T. A. Siewert, "Present Consumable Technology Advances into the 21st Century", Welding Journal, 69 (11), 37-40 (1990).

112. D.W. Oh, D. L. Olson, and R. H. Frost, "B Plus Ti Makes Welds that Are Strong, Tough", Welding Design and Fabrication, 63 (11), 16 (1990).

113. R.A. Nichting, D. L. Olson, and G. R. Edwards, "Low Temperature Solid State Bonding of Copper", J. Mat. Eng. and Performance, 1 (1), pp. 35-44 (1992).

114. G. L. Berry, D. L. Olson, and D. K. Matlock, "Influence of Microcompositional Gradients on Stress Corrosion Cracking Propagation", Mat. Sci. and Engr. A148, pp. 1-6 (1991).

115. B. F. Carpenter, D. L. Olson, D. K. Matlock, and M. J. Cieslak, "Phase Stability of Fe Al Cr Ni Weld Metal", Mat. Sci. and Engr. A147, pp. 1-8 (1991).

116. S. Ibarra, D. L. Olson, and S. Liu, "Effect of Water Depth on Underwater Weld Metal Porosity Formation", Proc. of Intn. Conf. on Underwater Welding, pp. 54-69, New Orleans, LA, March 20-21, AWS, Miami, Florida, (1991).

117. S. Liu, S. Ibarra, and D. L. Olson, "Flux Formulation for Wet Underwater Welding Electrodes", Proc. of Intn. Conf. of Underwater Welding, pp. 98-119, New Orleans, LA, March 20-21, AWS, Miami, FL (1991).

118. D. L. Olson, S. Ibarra, and S. Liu, "Selection of Resilient Welding Parameters for Arctic Fabrication and Repair", Proc. 10th Intn. Conf. OMAE, Stavanger, Norway, III-A, 125-130, ASME, N.Y., N.Y. (1991).

119. D. W. Oh, D. L. Olson, and R. H. Frost, "Nucleation Mechanisms of Acicular Ferrite in Low-Carbon Steel Weld Metal", Proc. Symp. Welding and Joining Processes, ASME Publication, PED, vol. 51, pp. 49-61, Atlanta, GA, December 1-6 (1991), ASME, N.Y., N.Y., Book No. H00684 (1991).

120. A. Wahid, D. L. Olson, D.K. Matlock, and T.J. Kelly, "Role of Compositional Gradients in Environmentally Promoted Weld Cracking", Proc. of ASM "Heat Resistant Materials Conference", pp. 447-452, ASM, Materials Park, OH (1991).

121. S. Ibarra, D. L. Olson, and S. Liu, "Fundamental Prediction of Steel Weld Metal Properties", Trans. ASME - J. of Offshore Mechanics and Arctic Engineering, 113 (11), pp. 327-333 (1991).

122. P. R. Chidambaram, G. R. Edwards, and D. L. Olson, "Fundamental Aspects of Metal-Quartz Joining", Proc. Int. Symp. on "Joining of Materials for 2000 A.D., SOJOM-91, pp. 331-338, December 12-14, 1991, Tiruchirapilli, India, Indian Institute of Welding (1991).

123. M. S. Dvornak, R. H. Frost, and D. L. Olson, "Influence of Solidification Kinetics on Aluminum Weld Grain Refinement", Welding Journal 70 (10), 271s-276s (1991).

124. S. Ibarra, D. L. Olson, and S. Liu, "Methods for Prediction of Weld Properties", Welding Design and Fabrication, 64 (8), p. 16 (1991).

125. D.L. Olson and D.K. Matlock, "Weld Metal Phase Stability", Proc. AIME-TMS Symp. on The Metal Science of Joining, pp. 135-139, TMS-AIME, October 20-24, Cincinnati, OH (1991), Warrendale, PA (1992).

126. P.R. Chidambaram, G.R. Edwards, and D.L. Olson, "Wetting of Ceramic by Molten Metals: Rate Controlling Phenomena", Proc. AIME-TMS Symp. on The Metal Science of Joining, pp. 67-71, TMS-AIME, October 20-24, Cincinnati, OH (1991), Warrendale, PA (1992).

127. D.L. Olson and C.E. Cross, "Wear in the Mining Industry", ASM Metals Handbook, pp. 649-655, ASM, Materials Park, OH (1992).

128. P.R. Chidambaram, G.R. Edwards, and D.L. Olson, "A Thermodynamic Criterion to Predict Wettability at Metal-Alumina Interfaces", Met. Trans. 23B, pp. 215-222 (1992).

129. M. Holt, D. L. Olson, and C. E. Cross, "Interfacial Tension Driven Fluid Flow Model for Hot Cracking", Scripta Met. et Mat., 26 (7), pp. 1119-1124 (1992).

130. D. L. Olson, S. Liu, and G. R. Edwards, "Physical Metallurgical Concerns in the Modeling of Weld Metal Transformations", "Mathematical Modeling of Welding Phenomena", edited by H. Cerjak and K.E. Easterling, pp. 89-108, Institute of Materials, London, U.K. pp. 89-108 (1993).

131. S. Ibarra and D. L. Olson, "Wet Underwater Steel Welding", Ferrous Alloy Weldments, Key Eng. Mats. Vol. 69-70, pp. 329-378, Trans. Tech. Publ., Zurich, Switzerland (1992).

132. D. L. Olson, G. R. Edwards, and S. K. Marya, "The Physical and Chemical Behavior Associated with Slag Detachability during Welding", Ferrous Alloy Weldments, Key Eng. Mats. Vol. 67-70, pp. 253-268, Trans. Tech. Publ., Zurich, Switzerland (1992).

133. T. A. Siewert, C. N. McCowan, and D. L. Olson, "Ferrite Number Prediction for Stainless Steel Welds", Ferrous Alloy Weldments, Key Eng. Mats. Vol. 67-70, pp. 149-166, Trans. Tech. Publ., Zurich, Switzerland (1992).

134. P. R. Chidambaram, A. Meier, G. R. Edwards, and D. L. Olson, "Wetting and Spreading at Alumina-Copper Alloy Systems", Proc. 3rd Intn. Conference on Trends in Welding Research", June 1-5, 1992, Gatlinburg, TN, pp. 1107-1111, ASM, Materials Park, OH (1993).

135. K. S. Bang, S. Liu, and D. L. Olson, "Modeling of Reactive Layers Growth in Reactive Metal Brazing", Proc. 3rd Intn. Conference on Trends in Welding Research, June 1-5, 1992, Gatlinburg, TN, ASM, pp. 1129-1134, Materials Park, OH (1993).

136. S. H. Wang, D. K. Matlock, and D. L. Olson, "Physical Simulation for the Creep Behavior of Solidified Weld Metal", Proc. 3rd Intn. Conference on Trends in Welding Research, June 1-5, 1992, pp. 605-609, Gatlinburg, TN, ASM, Materials Park, OH (1993).

137. R. H. Frost, S. Liu, and D. L. Olson, "Pyrochemical Evaluation of Weld Metal Inclusion Evolution", Proc. 3rd Intn. Conference on Trends in Welding Research, June 1-5, 1992, Gatlinburg, TN, pp. 205-209, ASM, Materials Park, OH (1993).

138. E. I. Kivineva, D. L. Olson, and D.K. Matlock, "Particulate Metal Matrix Composite as a Weld Deposit", Welding Journal, 74 (3), pp. 83s-92s (1995).

139. K. S. Bang, S. Liu, and D. L. Olson, "Interfacial Reaction Between Alumina and Cu-Ti Filler Metal During Reactive Metal Brazing", Welding Journal, 73 (3), pp. 54s-60s (1994).

140. S. H. Wang, D. K. Matlock, and D. L. Olson, "High Temperature Deformation and Fracture Behavior of Laminate Composite: The Importance of Interdiffusion During Creep", Scripta Met. and Mat., 27, pp. 35-40 (1992).

141. D. L. Olson, G .R. Edwards, S. Liu, and D. K. Matlock, "Non-Equilibrium Behavior of Weld Metal in Flux-Related Processes", IIW Document IX-1685-92, pp. 1-49, American Council, AWS, Miami, FL (1992), Welding in the World, 31 (2), (March/April) pp. 142-154 (1993).

142. A. O. Kluken, S. Ibarra, S. Liu, and D. L. Olson, "Use of Predictive Equations for Arctic Steel Heat Affected Zone Properties", Offshore Mechanics and Arctic Energy (Proceeding of 11th Intern. Conf.) OMAE III, Part A-Materials Engineering, pp. 1-8, ASME (1992).

143. S.K. Marya, D.L. Olson, and G.R. Edwards, "Scope of Predictive Equations in Welding Metallurgy of Steels", to be published in Proc. of JOM-6, Sixth International Conf. on the Joining of Materials, April 5-7, 1993, pp. 258-265, Helsingor, Denmark (1993), also published in Int. J. for the Joining of Materials, vol. 6 (2X), pp. 73-78 (1994).

144. S.H. Wang, D.K. Matlock, and D.L. Olson, "An Analysis of the Critical Conditions for Diffusion Induced Void Formation in Laminate Composite", Mat. Sci. and Eng., A167, pp. 139-145 (1993).

145. C.E. Grubbs, A.E. Bettelmann, S. Ibarra, S. Liu, D.J. Marshall, and D.L. Olson, "Underwater Welding and Cutting", AWS Handbook, 8th Edition, 3, Part 1, Chapter 10, pp. 445-500, AWS, Miami, FL (1996).

146. D.L. Olson, S. Liu, S. Ibarra, and O. Runnerstam, "Oxygen As A Welding Parameter: The Role of Light Metallography", Microstructural Science 20, pp. 31-44, (1993).

147. A.O. Kluken, S. Ibarra, S. Liu, and D.L. Olson, "Aptness of Predictive Equations for Arctic Steel Heat Affected Zone Properties", Proc. of 12th Intn. Conf. of OMAE, vol. 3, Part A, pp. 35-40, Glasgow, Scotland, June, ASME, N.Y., N.Y. (1993).

l48. D.W. Oh, D.L. Olson, and R.H. Frost, "The Influence of Zirconium and Boron on Low Carbon Steel Weld Metal Microstructure", J. Eng. for Industry, 116 (1), pp. 26-31 (1994).

149. A Sanchez-Osio, S. Liu, D.L. Olson, and S. Ibarra, "Underwater Wet Welding Consumables for Offshore Applications", Proc. of 12th Intn. Conf. of OMAE 1993, Vol. 3, Part A, pp. 119-128, Paper #OMAE 93-848, Glasgow, Scotland, June 20-24, ASME, N.Y., N.Y. (1993).

150. F.C. Liao, S. Liu, and D.L. Olson, "Weldability of Nitrogen-Enhanced HSLA Steels", Proc. of 12th Intn. Conf. of OMAE 1993, vol. 3, Part A, pp. 231-244, Glasgow, Scotland, ASME, N.Y., N.Y. June 20-24 (1993).

151. D.L. Olson, G.R. Edwards, and B. Mishra, "The Chemical Constitution of Welding Consumables", Proc. Int. Conf. of Health and Safety in Welding and Related Processes, South African Institute of Welding, Pretoria, South Africa, vol. 2, paper #1, pp. 1-10 (1993).

152. PR. Chidambaram, G.R. Edwards, and D.L. Olson, "Kinetics of Interlayer Formation on a ?-Al203/Copper-Titanium Alloy Interface", Met. Trans. 25A, pp. 2083-2090 (1994).

153. F.C. Liao, S. Liu, and D.L. Olson, "Effect of Titanium Nitride Precipitates on the Weldability of Nitrogen Enhanced Ti-V Microalloyed Steels", Proc. of 35th ISS Mechanical Working and Steel Processing (MWSP) Conference, vol. 31, pp. 511-522, Pittsburgh, PA, October (1993), ISS-AIME, Warrendale, PA (1994).

154. M. Onsoien, R. Pieters, D.L. Olson, and S. Liu, "The Effect of Hydrogen in an Argon Shielding Gas on Arc Characteristics and Bead Morphology", Weld. J., 74 (1), pp. 10s-15s (1995).

155. C.E. Cross, D.L. Olson, and G.R. Edwards, "The Role of Porosity in Initiating Weld Metal Hot Cracks", Proc. Intn. Conf. on Modeling and Control of Joining Processing, Orlando, FL, December 8-10 (1993), pp. 549-557, AWS, Miami, FL (1994).

Welcome to Physics 123 (section 2)!Fall 2012NOTE: Section 2 is for Physics majors and minors only, or (with my permission) for people who are seriously considering a major/minor.

Instructor: John S. Colton
Email address: "john_" (including the underscore) plus "colton" at byu.edu
Office hours: MWF 2-3 pm, in the Underground Lab study area
Office: N335 ESC, meetings available by appointment

T.A./grader: Clément Gaillard
TA's email address: clement.byuta@gmail.com
TA's office hours: MWF 3-4:30 pm, in the Underground Lab study area

Announcements

  • 11 May 2012 - barebones website set up
  • 5 Jul 2012 - syllabus posted

Textbooks

  • The main textbook for the class is Physics for Scientists and Engineers, by Serway and Jewett (6th, 7th, or 8th editions). You will need a textbook, or combination of textbooks, that covers chapters 14, 16-22, and 35-39. Inexpensive used versions are perfectly acceptable.
  • A small auxiliary textbook will be Physics phor Phynatics, by Dallin Durfee (a faculty member here at BYU). This book contains supplementary material specific to this section of 123. It is a very inexpensive book, and Dr. Durfee does not receive any royalties.

Syllabus and Course Packet

  • Phys 123 section 2 syllabus.pdf - The syllabus will also be available in the bookstore for purchase, for $5-6. If you prefer, you can print out your own copy from the pdf file--but if you do so, please don't use department printers unless you reimburse the department for the expense.

Warm-up Exercises

Lecture Notes

  • Some students like to print out lecture notes before the lectures, for use in taking notes. If you want to do that, you can use my lectures from last semester. This semester's lectures will likely be fairly similar to those lectures.
  • lecture 1 - intro, pressure
  • lecture 2 - Archimedes' principle
  • lecture 3 - fluid motion
  • lecture 4 - thermal expansion, ideal gas law
  • lecture 5 - kinetic theory (note: we didn't get to the last couple of slides, but we'll pick up there next lecture)
  • lecture 6 - calorimetry
  • lecture 7 - heat transfer
  • lecture 8 - first law
  • lecture 9 - molar specific heats
  • lecture 10 - engines
  • lecture 11 - refrigerators and Carnot
  • lecture 12 - entropy
  • lecture 13 - what is entropy
  • lecture 14 - waves (note: we didn't get to the last couple of slides, but we'll pick up there next lecture)
  • lecture 15 - waves on a string
  • lecture 16 - complex numbers (Note: we didn't get to the last 4 slides. We'll start there next time.)
  • lecture 17 - reflection, transmission, sound intro (Note: we didn't get to start the stuff on sound)
  • lecture 18 - sound - intensity, doppler
  • lecture 19 - superposition, standing waves
  • lecture 20 - more standing waves, resonance
  • lecture 21 - wave packets, dispersion (Note: we didn't get to the last 2 slides, but that's OK. They relate to the next lecture.)
  • lecture 22 - Fourier 1
  • lecture 23 - Fourier 2
  • lecture 24 - music
  • lecture 25 - reflection, refraction, dispersion
  • lecture 26 - Huygen, TIR
  • lecture 27 - polarization, Brewster
  • lecture 28 - images from mirrors
  • lecture 29 - images from lenses
  • lecture 30 - aberrations, camera, eye
  • lecture 31 - magnifier, telescope (Note: we didn't get to the last slide, but we'll talk about it next lecture)
  • lecture 32 - interference from slits
  • lecture 33 - more interference
  • lecture 34 - diffraction from wide slits
  • lecture 35 - resolving, gratings
  • lecture 36 - waves in 3 dimensions, optical devices
  • lecture 37 - intro to relativity
  • lecture 38 - special relativity
  • lecture 39 - Lorentz transformations 1
  • lecture 40 - Lorentz transformations 2
  • lecture 41 - E=mc^2

Videos of Demos



Loading movie...

If you are unable to see the movie, make sure you have Javascript enabled and have the latest Flash Player.

Here are a lot of the demos I have done/likely will do in class this semester, posted here in case you have to miss a class. The videos were filmed in old Phys 123 and Phys 105 classes. Click on the demo title to get it to play in the movie window.

  • lecture 1 - force vs pressure | collapsing can | Magdeburg hemispheres
  • lecture 2 - bed of nails | reverse tug of war | Coke vs Diet Coke | aluminum foil sink or float | force from submerged weight (we skipped the aluminum foil one, and did force from submerged weight in lecture 3)
  • lecture 3 - chimney effect | cards and wooden block | ball in funnel | floating ball | blowing on paper | Bernoulli red fluid 
  • lecture 4 - liquid bulb thermometer | pressure gauge thermometer | bimetallic strip | ring and ball | helium vs air balloon | LN volume expansion | LN balloon pop | rubber nail  (we didn't do the last two, but they may be fun for you to watch)
  • lecture 5 - lighter molecules go faster | fast molecules cause pressure (we didn't get to the last demo, but we'll do it at the start of next lecture)
  • lecture 6 - boiling water at 300K
  • lecture 7 - failed attempted at boiling water in a paper cup--sorry, no video | here's a convection demo from a previous semester: convection current
  • lecture 9 - alcohol rocket (aka constant volume change) | freeze spray | adiabatic cotton burner (this is a larger version of the one that I used in class)
  • lecture 11 - Stirling engine | thermoelectric engine (not recorded)
  • lecture 14 - Slinky - longitudinal and transverse waves
  • lecture 15 - tubing - wavespeed depends on tension | predicting wave speed ( v = sqrt(T/mu) ) | Shive wave machine - amplitudes add or subtract | 6 still shots of the amplitudes subtracting | Here's another one we won't do, but which may be helpful to some of you: spring vs circular motion
  • lecture 17 - Reflection at boundary
  • lecture 18 - no sound in a vacuum | tuning forks | singing rod | Joy to the World (with compressed air hose) | Doppler effect | hearing test (note that I don't know if the microphone picked up the highest frequencies, because I myself can't hear them!) 
  • lecture 19 - two speaker interference | standing waves on a rubber tube | lady's belt and jigsaw
  • lecture 20 - trumpet harmonics (note in the recording I said "even without using notes" where I meant "without using valves")  | flame standing waves | beats
  • lecture 23 - waves on a slinky: initial shape of triangle | square pulse (happened too quickly to capture on video, sorry)
  • lecture 25 - basic reflection and refraction (sorry, no video)
  • lecture 26 - TIR in a stream of water | fiber optic - large fiber | fiber optic - actual size fibers (sorry, no video for the fiber optics demos)
  • lecture 27 - light coming through three polarizers (sorry, no video) | light reflecting at brewster angle
  • lecture 28 - mirror real image or not | filament reflected in bulb | hanging ball pendulum
  • lecture 29 - lens real image or not | covering up half of the lens (sorry, no video)
  • lecture 32 - diffraction from a double slit
  • lecture 33 - interference from a thin film
  • lecture 34 - diffraction from a single wide slit | measuring the width of a hair (we didn't do this in lecture 34, but will do it in lecture 35)
  • lecture 35 - diffraction from a grating

Homework

Scores and Grade

Class Identification Numbers

I-Clicker registration

Labs

  • Instructions for all the labs, along with the sheets which must be turned in, can be found in the main syllabus packet following the homework problems. Due-dates for the labs are shown on the main schedule, the first page of the syllabus.
  • All but two of the labs are similar to the "walk-in" labs of Physics 121. They will be set up in room S415 ESC on the dates indicated on the schedule.
  • Two of the labs involve computer simulations. Follow these links to get more information for those labs:

Term Project Info

Selected Term Projects From The Class

  • Collision Simulator, by Ryan Peterson
  • Hot air balloon videos, by Hsin Ping Chang, Konrie Ming, Dallin Barton: attempt 1, attempt 2,
  • Musical cadence app, by Cade Daniel and Seth Poulsen (right-click to download, unzip to a folder with the "media" subfolder in the same place as the SemesterProject.exe file )
  • Spanish Speech Synthesizer, by Chris Olsen, Will Nuckolls, and Jacob Ward (download the zip file, unzip into a directory, then open the Mathematica file)
  • Two "super cool" videos of supercooled water, by Kristoffer Molinari and Lance James, flash freeze, pouring ice
  • Attempts to study backspin, by Josh Porter and Michael Pearson:

Tutorial Lab Info

Old Exams

Here are some old exams for you to use as study aids. I strongly recommend that you attempt to work the problems on the actual exams before looking at my solutions. There's no guarantee that this year's 123 exams will be the same as any of these posted exams, in terms of multiple choice/not multiple choice, time limit/no time limit, notes/no notes, calculators/no calculators, difficulty level and so forth. It is likely that I will not let students use any notes on the exams, but rather I will provide some (but not all!) equations on the first page, like this sample first page of exams.

This semester's exams

How to get started

  • You need to do the following things as soon as the semester begins. (If you have added the class late, it's even more important to do them ASAP.)
    → If you have not received one in an email, get a "class ID number" using the "Obtain your class ID number" link on this page. You will use the CID as your personal identifier for all your assignments.
    → Read the syllabus, available either as a pdf file elsewhere on this web page, or from the bookstore. Among other things, the HW problems are found in the syllabus.
    → Get a copy of the Serway & Jewett textbook (see textbook info, elsewhere on this web page). If you can't get one soon, you can use one of the copies available in the Tutorial Lab (see Tutorial Lab info elsewhere on this web page).
    → Do the reading assignments for each upcoming lecture as marked on the schedule on pg 1 of the syllabus; if joining late, do the past reading assignments.
    → Do the first "warmup exercise" by midnight on Monday, 27 Aug 2012. Links to warmups are above.
    → Do the other warmup exercises before class for each upcoming lecture, due at 12:15 pm the day of the lecture.
    → Get an "i-clicker" at the bookstore if you don't already have one. Bring your clicker to each class.
    → Register your clicker (via the link elsewhere on this page) so that you get credit for in-class clicker quizzes.
    → Get your individualized homework data numbers which you will plug into the HW problems in your syllabus, using the "Print HW data sheet" link on this page.
    → Start working HW problems! The first assignment is due Wed, Sep 1. You can get credit for late assignments, so work the HW sets you miss/have missed, in addition to the ones coming up. The syllabus has much more about how to turn in HW problems.
    → Where required, submit your computer-graded HW answers via the online system using the "Submit HW" link. Again, read how to do this in the HW section of the syllabus. Learn how to get partial credit by re-submitting the problems you get wrong. Talk to other students to figure this out, if necessary. HW due-dates are marked on page 1 of the syllabus.
    → Be sure to turn in the work for your HW problems to the slot labeled “Phys 123, section 2” in boxes near room N375 ESC.
    → Sign up for a departmental computer account if you don't have one already.
    → Gain access to the departmental computer labs (N337 and N212) by talking to Diann Sorenson in room N281.

Mathematica

  • Dr. Colton's Basic Commands of Mathematica document. (Must be opened with Mathematica.)
  • BYU Physics Department's website for Physics 230, where among other things a number of introductory computational labs can be downloaded (if you want even more Mathematica than in my "Basic Commands" document).

Math Review

Supplementary Material

Current Topics in Physics

0 Thoughts to “Olson Phy 121 Homework 3-4

Leave a comment

L'indirizzo email non verrà pubblicato. I campi obbligatori sono contrassegnati *